RE: NEC 3500 and OEM official firmware overview 22/12/2004 Updated! (Full Version)

All Forums >> [Optical Storage] >> Firmware >> NEC



Message

alfa 156 -> RE: NEC 3500 and OEM official firmware overview 22/12/2004 Updated! (1/10/2005 3:38:10 PM)

can the 3500 write dual layer DVD+RW?
thank you



eros -> RE: NEC 3500 and OEM official firmware overview 22/12/2004 Updated! (1/10/2005 4:44:49 PM)

There is no DL+ RW technology, only DL+R, and the 3500 writes to these discs.



emperor -> RE: NEC 3500 and OEM official firmware overview 22/12/2004 Updated! (1/10/2005 4:51:30 PM)

That is correct, there isn't , yet?, a DVD+RW DL format



alfa 156 -> RE: NEC 3500 and OEM official firmware overview 22/12/2004 Updated! (1/10/2005 4:55:46 PM)

quote:

ORIGINAL: emperor

That is correct, there isn't , yet?, a DVD+RW DL format


so is there or is there not?
i read a review of the plextor dual layer where it states that it can write DVD+RW @ 2x and DVD+RW DL @ 2x.



Paradaz -> RE: NEC 3500 and OEM official firmware overview 22/12/2004 Updated! (1/12/2005 5:27:12 PM)

I've just bought the NEC3500. The firmware (which I haven't changed) is 2.18 - I've only attempted to burn 2 DVD's so far......and have had the same problem both times using the latest version of Nero. The progress bar gets stuck on 24%!

Is this a common error? Does the burner think it is a CD in the drive? Am I missing something obvious?

Please help, thanks in advance.



emperor -> RE: NEC 3500 and OEM official firmware overview 22/12/2004 Updated! (1/16/2005 1:41:50 PM)

alfa 156 there isn't, again yet(?) a DVD+RW DL format! I said yet cause we don't know what the DVDRW Alliance will announce this or next year...



salmonella -> RE: NEC 3500 and OEM official firmware overview 22/12/2004 Updated! (1/21/2005 12:28:01 AM)

Hi Guys
I just bought NEC 3500A and connect it to the external firewire box. Now I'm thinking to update it to 2.18 but I'm not sure that I can do it or not. Since on the NEC's support page said

quote:

The NEC firmware upgrade below should not be used with external USB / FireWire drives


So is it possible?
thanks in advance



alfa 156 -> RE: NEC 3500 and OEM official firmware overview 22/12/2004 Updated! (1/21/2005 4:11:51 AM)

quote:

ORIGINAL: salmonella

Hi Guys
I just bought NEC 3500A and connect it to the external firewire box. Now I'm thinking to update it to 2.18 but I'm not sure that I can do it or not. Since on the NEC's support page said

quote:

The NEC firmware upgrade below should not be used with external USB / FireWire drives


So is it possible?
thanks in advance


you can connect it to an IDE, upgrade it and then put it back in the firmware box.



emperor -> RE: NEC 3500 and OEM official firmware overview 22/12/2004 Updated! (1/21/2005 8:36:35 AM)

Or use Binflash, probably will work OK



Hawk -> RE: NEC 3500 and OEM official firmware overview 22/12/2004 Updated! (1/24/2005 10:40:03 AM)

Is there any new news on firmware updates for the 3500?



emperor -> RE: NEC 3500 and OEM official firmware overview 22/12/2004 Updated! (1/24/2005 6:30:01 PM)

not really...[:(]



blow -> RE: NEC 3500 and OEM official firmware overview 22/12/2004 Updated! (1/29/2005 11:39:37 AM)

What about the dvd+rw 8x & dvd-rw 6x ?? (is it possible or not )
NEC is great but they could often release their firmware updates.



RayLarson -> RE: NEC 3500 and OEM official firmware overview 22/12/2004 Updated! (1/29/2005 1:16:58 PM)

Have a LaCie Firewire DVD Burner. It is listed as a NEC 3500A(G) have 2.07 firmware. Burns up to 8x disks fine but just bought 50 16x Optodisk DVD-R and it won't even recognize them. LaCie Tech support seems useless. I am not that fluent on upgrading firmware but also don't want 50 coasters. These disks will burn in my Panasonic Standalone burner and work in my Pioneer A04 but write at 2X.

Sure could use a lot of help here.

Thanks



emperor -> RE: NEC 3500 and OEM official firmware overview 22/12/2004 Updated! (1/29/2005 7:16:48 PM)

@ blow, there isn't such upgrade, wait for ND-3530 to hit the market

@ raylarson, try to updateto firmware 2.18



RayLarson -> RE: NEC 3500 and OEM official firmware overview 22/12/2004 Updated! (1/30/2005 2:04:30 PM)

My Burner is a usb/firewire connected thru the firewire port. What files do I need and what is the procedure? I am a real newbie at this but it makes sense that the 2.07 firmware doesn't recognize the 16x Optodiscs. I would love to get this drive running at 16x like it's supposed to.



blow -> RE: NEC 3500 and OEM official firmware overview 22/12/2004 Updated! (1/30/2005 2:06:01 PM)

@ emperor rEsPeCt
But I have on mind RW only not DL (ND-3530 nice).



Page: <<   < prev  8 9 [10] 11 12   next >   >>

Valid CSS!




Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI
0.015625