RE: NEC 3500 and OEM official firmware overview (Full Version)

All Forums >> [Optical Storage] >> Firmware >> NEC



Message

tqhoang -> RE: NEC 3500 and OEM official firmware overview (1/20/2006 10:34:40 AM)

quote:

ORIGINAL: izocky

Seems like this thread has hibernated or maybe this burner has gone obsolete. Unfortunately, I still have the 3500-AG and still is in need of the latest firmware. I recently purchased new media, Memorex DVD-R 16X and I'm only burning at 2x. Can somebody please direct me to a site where I can upgrade my drivers and how to check what version my burner currently has?

Thanks.

I use DVD Shrink 3.2 [8|]



Here is the latest official firmware for the NEC ND-3500A(G) v2.1A.
http://support.necsam.com/optical/downloads/flashfirmware/

You can also try Liggy & Dee's page.  http://liggydee.cdfreaks.com/page/
If you just want a v2.1A with RipLock and/or RPC1, then use one of the Original Firmware v2.1A.
If you just want a v2.1A with Bitsetting + RipLock and/or RPC1, then use one of the Liggy's Bitsetting Firmware v2.1A.
If you want to try that plus media hacks, then one of Dee's v2.TG is the latest.  Discussion for that one is here:  http://club.cdfreaks.com/showthread.php?t=144344



Biggene -> RE: NEC 3500 and OEM official firmware overview (1/20/2006 7:46:50 PM)

 cannot figure out how to update the frimwaere to this duplicator. Ive downloaded a couple versions of the firmware. burned it to a cd then in the advansed setting thied to update the firmware. but it always says invalid disc.
The 7 drives are nd-3520a NEC drives
Ive used these firmware updates
NECND352_v306
3520_304 Orininal bin file

I'm not knowledgeable about things like rip locks and many thing i've read through on this site, But i follow instruction well. :)  
Any advise or help with this would be greatly appriciated



Flash -> RE: NEC 3500 and OEM official firmware overview (1/21/2006 8:22:12 AM)

You cannot update the firmware for the installed optical drives using the duplicator firmware upgrade process; this is for updating the firmware of the duplicator controller.
To update the firmware of the drives they have to be installed in a PC.



MEDS -> RE: NEC 3500 and OEM official firmware overview (3/27/2006 5:29:36 PM)

HELP!!!!!!!

I have a NEC 3500 DVD burner, had some problems with traxdata 16x( it wouldn't start burn) so i downloaded official firmware 2.1A and it solved the problem.
However i have problem with meda RITEKG05....one dvd usually locks my PC, other two dvd reports [image]http://i1.tinypic.com/sdmjit.jpg[/image]

will a certain firmware solve these problem, and read these disc properly, or should i tell me friend to reburn these dvds on Traxdata/Verbatim media?!??!



SUPR3M3 -> RE: NEC 3500 and OEM official firmware overview (4/14/2006 6:23:56 PM)

New Official Firmware out!
http://www.de.nec.de./software/2348_FW_ND-3500A_win21B.zip



franz99 -> RE: NEC 3500 and OEM official firmware overview (4/15/2006 12:53:51 AM)

Does this new 2.1B version allow PI/PIF scanning on the NEC 3500 using CD-DVD Speed ?

like the 2.R8 version that we have been waiting for a so long time ...



coze -> RE: NEC 3500 and OEM official firmware overview (5/4/2006 1:23:21 PM)

Hello,
I got an nec 3500 drive, and I just upgraded it to 2.1b firmware (no region, no rpc). I got a couple of questions.
1 - is it possible to write to smartbuy (prodisc dvd+r) DL media with this drive ? (with another firmware ?)
2 - I´m trying to overburn a tyg02 dvd-r media (3 megs) with no luck (using nero 7.0.8.2). do I have any chance or should I give up ?

many thanks.



Razorback -> RE: NEC 3500 and OEM official firmware overview (5/4/2006 2:16:23 PM)

i cant update to 2.1b.. i have nec nd-3500AG
it says that  " target nec nd-3500A is not found correctly"

what would i do??



tqhoang -> RE: NEC 3500 and OEM official firmware overview (5/4/2006 7:07:44 PM)

http://binflash.cdfreaks.com/

Use Liggy's Binflash to update the firmware.  It can take either the .bin or .exe firmware files as input.



kubus -> RE: NEC 3500 and OEM official firmware overview (5/5/2006 4:51:45 PM)

Liggy & Dee's 2.1b +riplock+RPC1+bitsettung is out there:
http://liggydee.cdfreaks.com/page/3500/

Thank you  [sm=19.gif]  you are the best!



kubus -> RE: franz99 (5/7/2006 2:57:39 PM)

quote:

ORIGINAL: franz99

Does this new 2.1B version allow PI/PIF scanning on the NEC 3500 using CD-DVD Speed ?

like the 2.R8 version that we have been waiting for a so long time ...


NO! ... I guess it never will ...



Escudero -> RE: NEC 3500 and OEM official firmware overview (6/20/2006 1:20:20 PM)

Hi, I'm running a NEC ND-3500A drive with Firmware v2.16
Operating System is Windows 2000 Professional
The rated maximum speeds for it are 16x write to DVD+R/-R, 4x write to +/-RW and +R DL (http://www.cdrinfo.com/Sections/Reviews/Specific.aspx?ArticleId=10711)


However, using Nero7 Ultra, the maximum listed speed is 4x when I insert a 16x rated Maxell DVD+R, 16x rated FujiFilm DVD+R, or 16x rated TDK DVD+R blank media (all 4.7GB single layer discs).
Up to 12x is listed when 8x rated Memorex DVD-R media is used, and I have not tried any DL discs in the drive (I don't have any on hand)
I succesfully burned a DVD+R at 4x, and a mini DVD-R at 2x (1.4GB)
Without any disc inserted, the 1x - 6x options are listed.

Is there a suggested firmware version to help resolve this problem?
If anyone can help I'd like to know why this is occuring, and what steps can I take to resolve the problem?

thanks,
Christian



DrageMester -> RE: NEC 3500 and OEM official firmware overview (7/4/2006 5:58:31 PM)

Escudero, there are newer firmware versions for your NEC ND-3500AG drive.
The latest official version is 2.1B and it contains support for some newer media types, perhaps even the media you have.

You can get 2.1B firmware here from NEC Germany.

If you're interested in unofficial firmware you can have a look at the Liggy+Dee NEC 3500 homepage.



longboardHB -> RE: NEC 3500 and OEM official firmware overview (7/31/2006 12:00:38 AM)

I get a message that reads "The provided NEC firmware upgrade should not be used with external USB/FireWire drives of with OEM drives from HP, DELL, ...., or any other OEM manufacturer. If you wish to update the firmware on an OEM drive, please contact the dealer or manufacturer" when I go to cdr-info.com. I don't know what this means. I am trying to upgrade the firmware on my NEC model: ND-3550A. I have a dell computer. Are they refering to the hard drive when they say OEM drive? If so how do I upgrade the firmware on this burner? Also how do I post a message to this forum? This is the first time I have used it and I could not locate a post new message icon.



alexmacris -> RE: NEC 3500 and OEM official firmware overview (8/1/2006 2:19:18 PM)

Hi friend! I assume the message comes from the official updater, if you use Binflash, you will overpass this, just grab 2.1B and binflash and will do the job



XTREME -> RE: NEC 3500 and OEM official firmware overview (8/12/2006 7:52:44 PM)

I just updated the firmware for my NEC ND-3500AG with the official utility from http://www.de.nec.de/software/2348_FW_ND-3500A_win21B.zip in windows 2000 with out any problems.

I first disconnected the DVD player (slave) so I left on the secondary cable the NEC as master. Then I disabled the DMA for the secondary bus as required in the instructions (selected PIO mode). I booted in safe mode and I run the utility with success, re-enabled DMA and rebooted.

AND it still sees the Verbatim dual layer 4x 8.5GB as 3.99GB. The Nero info tool gives me a media id: MKM 01RD30 also at 3.99GB.

I had many problems with Verbatim with other burners in the past so I’m not going to buy that @#!!!*&% brand again no matter what! TDK has been always flawless for me. I did the mistake and bought a 5 pack Verbatim because TDK was out of stock and I regret it. No more that crap from now on! [sm=banghead.gif]



Page: <<   < prev  14 15 16 [17] 18   next >   >>

Valid CSS!




Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI
0.03125