RE: NEC 3500 and OEM official firmware overview (Full Version)

All Forums >> [Optical Storage] >> Firmware >> NEC



Message

franz99 -> RE: NEC 3500 and OEM official firmware overview (4/3/2005 3:52:23 AM)

On the official download page of Mad Dog:
http://www.maddogmultimedia.com/support/drivers.asp

only the 2.FD self-extracting firmware is available
on top of older versions such as: 2.F9 and 2.FA which I have used in the past

Is there any reason why they took away the 2.FC version thant I am using at the moment on my NEC 3500 retail drive ?
Is it recommended for me to upgrade to 2.FD ?

Does this new 2.FD version as usual only improve the writing strategies and add more media ?



DerAlSem -> RE: NEC 3500 and OEM official firmware overview (4/5/2005 8:14:32 AM)

quote:

The NEC firmware upgrade below should not be used with external USB / FireWire drives or with OEM drives from HP, DELL, Medion, Fujitsu, Siemens, Gateway, or any other OEM manufacturer. If you wish to update the firmware on an OEM drive, please contact the dealer or manufacturer.


I've FW Nec-3500. Is there a way to flash it?



emperor -> RE: NEC 3500 and OEM official firmware overview (4/5/2005 4:07:58 PM)

Use Binflash and any firmware as posted at the first page [;)]



emperor -> RE: NEC 3500 and OEM official firmware overview (4/7/2005 2:55:02 PM)

* Updated 07/04/2005
- Added 2.7A for TDK DVDRW16N [8D]



HayArms -> RE: NEC 3500 and OEM official firmware overview (4/10/2005 9:48:47 AM)

quote:

ORIGINAL: emperor

* Updated 07/04/2005
- Added 2.7A for TDK DVDRW16N [8D]



I'm waiting for the TDK Singapore Firmware with trepidation [8D]



cray111 -> RE: NEC 3500 and OEM official firmware overview (4/11/2005 11:13:45 AM)

I have a NEC DVD RW ND-3500 AG (Futitsu-Siemens PC).
Nero InfoTool shows firmware version 2.88

Which is the best firmware for my drive?
I'm a little bit confused about the diff. firmwares.

Thanx

O.K.- found this thread

http://www.cdrinfo.com/forum/tm.asp?m=104420



emperor -> RE: NEC 3500 and OEM official firmware overview (4/11/2005 9:22:34 PM)

@HayArms, i think that the 2.Cx series won't come back in life, TDK Signapore also seems to supply the 2.7A series



HayArms -> RE: NEC 3500 and OEM official firmware overview (4/15/2005 3:33:08 PM)

quote:

ORIGINAL: emperor

@HayArms, i think that the 2.Cx series won't come back in life, TDK Signapore also seems to supply the 2.7A series


That's a pity [:(]

And I imagine that there's no way to set Booktype (temporary or permanent) for DVD+R with 2.7A :(

Bye



emperor -> RE: NEC 3500 and OEM official firmware overview (4/17/2005 1:34:42 PM)

probably yes, no booktype option



Tabajara -> RE: NEC 3500 and OEM official firmware overview (4/24/2005 2:20:42 PM)

guys, is there a way to hack a NEC3500 writer into a NEC3520 one?



emperor -> RE: NEC 3500 and OEM official firmware overview (4/24/2005 3:24:26 PM)

no doesn't work, already tried it!



Tabajara -> RE: NEC 3500 and OEM official firmware overview (4/24/2005 5:07:12 PM)

quote:

ORIGINAL: emperor

no doesn't work, already tried it!

Too bad! [8|]

Have they a different hardware? Did someone compared the 3500 and 3520 bioses to see if enhancements to the 3520, such as DVD error analisys capability, can be adapted to the 3500?



emperor -> RE: NEC 3500 and OEM official firmware overview (4/28/2005 7:28:35 PM)

i have tried and almost make the 3500 drive useless, but we recovered it...



Xerox6502 -> RE: NEC 3500 and OEM official firmware overview (5/2/2005 1:15:29 PM)

(I hope this is the proper forum)
I have a 3500AG with the 2.19 firmware. I just gout a bunch of new CDR media (admittedly really cheep) media. They say on the package 1x-52x, but the drive only allows 8x & 16x. I would like to know two things:

1 – How does it come up with this … it cant possibly have a table for every brand and type of media? (a link to another thread/doc would be acceptable.)

2 – I would like to try higher speeds for this specific media and see what results I get, but if I flash a firmware that allows any speed for any media, I will obviously loose the feature to auto-detect proper burn speeds for other media. Is there any way for me to hack the firmware myself to allow higher speeds just for this media? (I have a lot of computer and programming skills … just never done anything with firmware before.) Alternately, is there a firmware that would allow me to turn the write speed limits on and off without re-flashing every time?

Thanks to all the firmware Gurus in advance.



Quikee -> RE: NEC 3500 and OEM official firmware overview (5/2/2005 3:43:40 PM)

It has a table of ATIP and Lead-In information for identifiying CD-R discs. =)
There is no firmware that will allow any speed for any media.. it's imposible to make one for Nec... also Nec firmware hacking is not a piece of cake and you have to know quite a bit about the firmware before trying anything.



Xerox6502 -> RE: NEC 3500 and OEM official firmware overview (5/4/2005 1:53:21 PM)

quote:

ORIGINAL: Quikee

It has a table of ATIP and Lead-In information for identifiying CD-R discs. =)
There is no firmware that will allow any speed for any media.. it's imposible to make one for Nec... also Nec firmware hacking is not a piece of cake and you have to know quite a bit about the firmware before trying anything.


I would really like to understand all this better ... particulatrly how the drive identifies CDR media, and what aspects of writing that can affect. Any suggestions of where I can go for such information? (I have extensive computer experience, but this is a new area for me.)



Page: <<   < prev  12 13 [14] 15 16   next >   >>

Valid CSS!




Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI
0.015625