RE: NEC 2500A v1.07 with DL and Bitsetting (Full Version)

All Forums >> [Optical Storage] >> CD, DVD, BD Drives



Message

emperor -> RE: NEC 2500A v1.07 with DL and Bitsetting (5/26/2004 10:29:22 AM)

You weclome spanish friend, hola!



emperor -> RE: NEC 2500A v1.07 with DL and Bitsetting (5/26/2004 10:31:09 AM)

Yes the DOS flasher works all the time! [:D]



seenbuddy -> RE: NEC 2500A v1.07 with DL and Bitsetting (5/27/2004 2:13:25 PM)

Emperor:

Helluva job you do. You mentioned the DOS flashing works all the time. I have the NEC 2500A (flashed with commercially available NEC software to 107) and now I am wondering what would be the syntax for doing under a DOS window? The included instructions aren't that clear that the Dangerous Brothers supplied. I mean I see the ORIG.bin and then the FAST & RPC1 bins. Which should I use to give me the most features for this drive and also getting back to my original question is since I have a Pioneer 107D (slave) and the NEC2500A (master) what would the syntax be? Don't want to flash my Pioneer drive (or my 2 HDs for that matter) in my PC. The Windows flasher by Harrier did not seem to work for me as when I put a disk in the NEC drive it could not read it so I flashed back to to NEC's commercial release and it copied a CD fine.

Could ya provide some guidance please. TIA

seenbuddy



emperor -> RE: NEC 2500A v1.07 with DL and Bitsetting (5/27/2004 6:28:27 PM)

First you need to know where you have installed your NEC 2500A.

Assuming you have installed the drive at Secondary IDE channel as MASTER you should type:

A:>NEC2x00A.EXE -sec -mas -flash filename.bin

In case the drive is installed at Secondary IDE Challe as SLAVE

A:>NEC2x00A.EXE -sec -sla -flash filename.bin

As for which firmware to use i guess the one with the widest features (RPC1+Fast). I would suggest also using Herrie's firmware that include improved writing strategies for many DVD media



Testomate -> RE: NEC 2500A v1.07 with DL and Bitsetting (5/28/2004 8:46:04 AM)

Does the Bitstetting really work? I burned several DVD using DVDShrink and DVDInfoPro always shows "DVD-R" as booktyp. Even though I told DVDSHrink to write the bit.



Lande -> RE: NEC 2500A v1.07 with DL and Bitsetting (5/28/2004 5:07:06 PM)

If I understand well, the firmware got a bug whit DVDSrink? Thanks GRACAS EN ESPAÑOL



emperor -> RE: NEC 2500A v1.07 with DL and Bitsetting (5/28/2004 5:37:34 PM)

You need to activate Booktype before burning with a software like DVDInfoPro



Lande -> RE: NEC 2500A v1.07 with DL and Bitsetting (5/29/2004 5:05:17 AM)

My NEC got the firmware 1.6, the official of NEC empereor ypu recomend to mi, install the firmware DL? Thanks and sorry ;) for the englis jeje



emperor -> RE: NEC 2500A v1.07 with DL and Bitsetting (5/29/2004 6:35:05 AM)

For sure i would suggest installing the official 1.07 and wait until more tests done with DL media from end users



rotinknee2 -> RE: NEC 2500A v1.07 with DL and Bitsetting (5/29/2004 8:06:22 AM)

Just for kicks the Dual layer burner from NEC the ND-2510A BGE will be in stock at NEWEGG.COM on 6-1-2004 for 92.99 free shipping so you guys wont be saving much at all by ordering the 2500 and flashing it.... heres a link to the page.... http://www.newegg.com/app/ViewProduct.asp?submit=manufactory&catalog=5&manufactory=1326&DEPA=0&sortby=14&order=1



emperor -> RE: NEC 2500A v1.07 with DL and Bitsetting (5/29/2004 11:15:04 AM)

Good news, NEC 2510A seems to come its presence at the world, lets hope DL media will arrive shortly...



Lande -> RE: NEC 2500A v1.07 with DL and Bitsetting (5/29/2004 4:04:59 PM)

Sure that 2510 its a 2500 whit firmware actualized. Nec send out the 2510 because the 2500 is convertible Sure. Hellos from spain



seenbuddy -> RE: NEC 2500A v1.07 with DL and Bitsetting (5/31/2004 2:31:06 PM)

Emperor:

Used Harrier's Beta 5 version, rebooted PC and everything seems fine. Am able to burn DVDs (Memorex 4x, DL Idunno) and Driveinfo22 says the drive is region free. Now if I could only get my hands on DVDInfoPro.

Thanks for all your help.



Laffin Assassin -> RE: NEC 2500A v1.07 with DL and Bitsetting (5/31/2004 2:41:22 PM)

You can get the Latest Version of DVDInfoPro from here :-
http://www.dvdinfopro.com/



emperor -> RE: NEC 2500A v1.07 with DL and Bitsetting (5/31/2004 6:09:04 PM)

quote:

ORIGINAL: seenbuddy
Emperor:
Used Harrier's Beta 5 version, rebooted PC and everything seems fine. Am able to burn DVDs (Memorex 4x, DL Idunno) and Driveinfo22 says the drive is region free. Now if I could only get my hands on DVDInfoPro.
Thanks for all your help.


Good news [:D]



Scarpad -> RE: NEC 2500A v1.07 with DL and Bitsetting (6/1/2004 11:58:59 AM)

Has someone confirmed you can bitset with this update? I was going to hold off on Updating till more reports came in on burning DL disks, but I'd love if I can set the Booktype to DVD-ROM for +R Disks for greater compatibility. Has anyone done this?



Page: <<   < prev  1 2 3 [4] 5   next >   >>

Valid CSS!




Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI
0.015625