Freecom Beatman Flash Recorder 128 Review - Page 4
Working with the Flash Recorder
The Flash Recorder stores the audio/data files in flash memory. The sample that
arrived in our labs had a capacity of 128MB, but Freecom also produces 256MB
and 512MB models. While 128MB might appear small to many of you, you can easily
about 3-4 hours of music. This depends mostly on the bitrate of the stored music.
The larger the bitrate/quality of the mp3/wma files you store, the less playback
time will be available. So if you feel you have greater needs for storage space,
you can go for the larger capacity models. Apart from the difference in storage
space, all models in the series are identical.
The main advantage of players that use flash memory instead of a CDROM reader is completely flawless playback without skips. Since the player does not have any moving mechanical parts (like the optical pickup that a CDROM reader has), there is no need for skip protection mechanisms. Playback is smooth, and skipping between tracks is almost instantaneous. So you can use the player without annoying skips while jogging, or doing any activity that requires rapid movement.
There is another advantage as well, that stems from the lack of mechanical
parts. Power consumption is much less than a CDROM reader based player. This
is the case with the Beatman Flash Recorder as well. It operates on a single
AAA size battery, which will give you many hours of playback time. In our tests
using the included Duracell battery, we managed to get a little more than
10 hours of playback. As stated in the specs as well, listening to FM radio
consumes even less power, so you will get more playback time than that one
As for the Flash Recorder itself, it is controlled with two small jog dial
buttons, both located on either side. Both buttons can be scrolled
up or down,
and they can be pushed towards the inside. All the Flash Recorder's functions
are controlled from here. The user manual that is included, both in print and
in electronic form, is quite explanatory and will help you configure and use
the Flash Recorder's functions without much hassle.
On the top side, we can see the earphones, line-in and USB connectors along with a selection switch and the builtin microphone. The switch selects between music, FM reception and the middle position ("HOLD") in which all the device's controls are locked so that nothing is accidentally pressed while listening. The USB with the line-in connector are protected by a plastic cap.
On the front side, we can see the LCD screen, which is backlit with a nice
neutral blue light.There are two buttons on the front. The one on the top named "RECORD" can
be used to start recording audio instantly to the device. The other button
on the left named "EQ/PRT" can be used to change the equalizer settings.
There are 5 presets, plus one more which is user configurable.
As for the wired remote control, it gives the ability to control most of the
Flash Recorder's functions easily without having to reach for the device. You
can adjust the volume, pause/play the current song, skip back/forward the current
song, change equaliser preset. There is a hold switch here as well, that you
can use to lock the buttons and avoid having them accidentally pressed. One
thing you should bear in mind is that the remote's volume control is analog,
from the volume setting of the Flash Recorder's. So if you experience low sound
output from the earphones when the remote control is connected and the volume
setting on the device is at maximum, check the volume setting on the remote
control as well.
Below you can see snapshots from the Flash Recorder's menu functions: