c0der
Posts: 7
Joined: 12/25/2002
From: Canada
Status: offline
|
I have a cd drive that plays DVD's and a cd burner but when I insert my playstation 2 game into my cd drive it doesnt read it.
I was reading some guids on how to burn ps2 games and play them without a mod chip here it is.
You will need the following things to burn PS2 games:
-a computer with a cdburner
-a blank cd-r (don’t use the re-recordable type a.k.a. cd-rw)
-CDRWIN - The version in this guide is 3.8D
-FireBurner -
-PS2 patcher -
-GameShark 2 for PS2
-the GameShark 2 is available at most stores that sell video games,
a few examples would be Best Buy, Circuit City, or Target. You
want version 1.0 of the GameShark 2. I have heard that all other
versions work, but I have only tested version 1.0. GameShark2
costs about 29.95. Believe me, its worth it!!!
-and a PS2 to play the games.
Burning the PS2
The process of burning ps2 games is easy. It is really only a 3 step process.(read
the game, patch the game, and burn the game.)
1) insert game into cd drive.
2) Open up CDRWIN and click on the extract disk/tracks/sectors button.
3) Your settings should be as follows:
For “extract mode” select disk image/ cue sheet
For “read options” select “raw”
For “error recovery” select “abort”
For “jitter correction” select “auto”
For “subcode analysis” select “auto”
Data Speed and Audio Speed should be the same
For “read retry count” type 0
For “subcode threshold” type 300
Make sure you selected the drive that your PS2 game is in
Make sure you typed in the file name (just type the name of the game) and
Check the directory that you’re putting your file in.
Then just press “start”
If you get an error in the middle of reading the disk that says something like “can’t read sections xxxx-xxxxx of disk”, it is becase the disk is scratched and CDRWIN can’t read it. Try to clean the disk, if that doesn’t work you just have to use a different game (a different copy of the same game)
4) Once CDRWIN is done, click ok and then exit CDRWIN. Open up the
PS2 patcher, select the game file you just created and patch it (make
sure you select the “RAW” option.
4) Close the PS2 patcher, next open up Fireburner. Click on the visual
cue burner button. When you created your .bin file (the game file) in
CDRWIN, a .cue file should have automaticly been created. In that
case, drag and drop the .cue file into the Fireburner window. If the
.cue file was not created, just drag and drop the .bin file into the
Fireburner window. After you have done that, right click (click with
the right side button on your mouse) on your file in the Fireburner
window, and select “Burn/Test burn”.
5) In the options window that appears, select your cdwriter, select your
write speed(doesn’t really matter), and make sure you select “Track at
once (TOA) for the recording method. As for the options on the right side of the options window, make sure only the following are checked:
“eject cd” and “close session”. When you have selected the options, click ok and your PS2 game will burn. That’s all you have to do to burn a game.
Burning a Playstion (PSone) game
1) If you want, you can spend 5 minutes using the same method as above
to burn your playstation game, but its not necessary. For a playstation game (not PS2) all you need to do is use a program that lets you make an “exact copy” or a “backup disk (CDRWIN)” You don’t need any selected options, you just need to start the game on the PS2 the same way you would a PS2 game.
Starting the game on you PS2
1) Now for the fun part (and challenging part the first couple of times)
This may sound a little complicated at first, but after you do it 3 or 4
times, it’s supper easy. First things first, you must remove the front of your game drive on your PS2(not a big deal, it can snap on and off).
2) Now insert your gameshark 2 cd(make sure the gameshark memory
card is in one of the 2 slots, doesn’t matter which one.)
3) In the gameshark options, choose “start game”, then “without”. Your screen should read “Please insert game disk then press X to continue.”
4) Now this part can be trickey for beginners, so I will provide pictures
-the main purpose of this starting method is to open up the PS2 and
swap the gameshark disk with your burned game without the PS2
knowing you did it. DO NOT press the eject button on the PS2!!!
-with the PS2 cd tray cover removed, you will be able to look in and see a while tab inside the PS2. With a credit card (or something like it) gently slide the white tab all the way over to the right, if you did it correctly, this should allow you to manually pull open the PS2 cd tray.
5) Next, take the gameshark disk out of the PS2 and put in your burned
game.
5) Gently push the PS2 cd tray fully back into the PS2 (Don’t press the
eject button).
6) Now you need to slide that white tab all the way back to the left (its
origional position). To do this you get a strong papper clip(needs to be a strong one) stick it into the PS2 on the right side of the white tab and push the tab back to the left.
7) If you pushed the tab all the way back to the left and did every thing
else right, you are ready to play your game. Just press X on your PS2 controler and watch as your burned game loads. ( It may load slower than an original game, depending on the cd-r you are using, I use Verbatim cd-r’s and have no problems.)
I tryed burning this the way this guide has explained but my cd drive wont even read my ps2 game is there a way i can get it to play ps2 burned games without a mod chip and using the way the guide has explained?
_____________________________
If practice makes perfect and no one is perfect, what's the point of practice?
|
You can click here to see
Today's Posts
|
Most Active Topics
|
Posts Since Last Visit
Printable Version
RE: Burning PS2 Games - 
New Messages
No New Messages
Hot Topic w/ New Messages
Hot Topic w/o New Messages
Locked w/ New Messages
Locked w/o New Messages
Post New Thread