Hello everyone,
I just made a back up of NOLF. Installed fine from back-up. Did all updates to XXX4. but won't play unless original is in drive. What did I do wrong?
liteon 24102b. ClondCD 4X. read:correction=none. read:sub=yes. write=max.
Thanx to any that reply.

Jeff in Los Angeles.USA.

It has got Safedisc 2 protection so use Clony XXL to do the settings in Clone CD and you should have no problems!

Laffin Assassin

It's Nice to be Important!!!
But it's more Important to be NICE!!!

(in reply to glazenuts)

Well thanx for replying. I tried using Clony xl final, since my I don't speak German. I live in the USA and have applied the weak sector patch. I've also seem comments to "Hide cdr media" or something similar, not available to Japan and USA. so you think that's my problem? I could always change the country.sys file I suppose, I think I can anyway, and set it to Canada to get around that I suppose.
Clony ID'd the protection as SD2, I used the recommended settings but it still won't play with the backup. Any other suggestions would be appreciated.

quote:

---

It has got Safedisc 2 protection so use Clony XXL to do the settings in Clone CD and you should have no problems!

Laffin Assassin

It's Nice to be Important!!!
But it's more Important to be NICE!!!

---

Go to :-
http://home.arcor.de/bejot/
And you will find the English Version 2.0.06 of CLONY XXL!!!!
Then let that do the settings for Clone CD also download and install the latest version of Clone CD !!!

Laffin Assassin

It's Nice to be Important!!!
But it's more Important to be NICE!!!

(in reply to glazenuts)

Tried your suggestion. I'm sorry to say same result. Any other Ideas, opinions out there.
Thanx,

Jeff in LA.(USA)

quote:

---

Go to :-
http://home.arcor.de/bejot/
And you will find the English Version 2.0.06 of CLONY XXL!!!!
Then let that do the settings for Clone CD also download and install the latest version of Clone CD !!!

Laffin Assassin

It's Nice to be Important!!!
But it's more Important to be NICE!!!

---

Flash your writer with the latest Firmware
http://www.cdrinfo.com/Sections/Firmware/List_DriveVersions.asp?ListWhat=LTR-24102B
And Change your Country in to Canada !


Laffin Assassin

It's Nice to be Important!!!
But it's more Important to be NICE!!!

(in reply to glazenuts)

After about 6 coasters I did it. I'm not quite use to the the new CloneCD 4x interface. I found my settings were SAO not DA0. changed it to DAO wrote at 4x and bingo!!! Thou, write speed may not have been a factor. why didn't Clony use DAO settings??????
Hope this helps someone else.

Good Luck,
Jeff in LA.

ps. Wrote another using same image at max write. Came out fine.
Thanks to L.A. for lending a hand.



Edited by - glazenuts on 07/04/2002 20:58:36

Edited by - glazenuts on 07/06/2002 08:49:13

(in reply to glazenuts)