|
stupidgenius -> RE: NEC 6500 official firmware overview 26/10/2004 Updated! (7/23/2006 9:26:17 PM)
|
I have a Dell Inspiron 9300 with the ND-6500A burner with Dell's 2.03d firmware installed. I've never had any problems with this burner in the past. I recently bought some new Sony DVD-R 16x media for use in all my computers, and my Dell is not able to burn to those discs. I tried some other cheap Dynex 16x discs I had laying around and those failed too. I don't have any DVD+R discs or slower DVD-R discs available to try. I have tried a Memorex 4x DVD+RW disc and it was able to burn to that. I've tried several versions of the firmware and nothing has enabled it to burn to the 16x media I have. (I know my burner only burns at 8x, but I have the 16x media because i have a 16x burner in another pc)
Is there an issue with the ND-6500A that doesn't allow you to burn to 16x media? If so, can a firmware up/downgrade solve this and if so, what version?
Here is my nero error log
(the second dvd drive is a virtual dvd drive created by daemon tools, ignore that)
------------------------------------------
4C82-Serial Number Removed By MP3Mogul
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 2:54:32 PM
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <_NEC DVD+-RW ND-6500A> Version: 203D - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SZ1441P EBM794C >Version: 1.0 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : HTS726060M9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SZ1441P EBM794C 1.0 dtscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD+-RW ND-6500A D: CDRom0
SZ1441P EBM794C E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047960kB)
Free physical memory: 634MB (649280kB)
Memory in use : 38 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.7.2006
ISO compilation
8:17:21 PM #1 Text 0 File Isodoc.cpp, Line 6410
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : FALSE
8:17:21 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
8:17:21 PM #3 Text 0 File Reader.cpp, Line 124
Reader running
8:17:21 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
8:17:21 PM #5 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
8:17:48 PM #6 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 607 ( 0:08.07, 1MB)
8:17:48 PM #7 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
8:17:48 PM #8 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193
8:17:48 PM #9 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
8:17:48 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 608 (608) = #608/0:8.8
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 608 blocks [D: _NEC DVD+-RW ND-6500A]
--------------------------------------------------------------
8:17:48 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [D: _NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1245184, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
608 | lead-out | 1 | 0x41 | 0x00
8:17:48 PM #12 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
8:17:48 PM #13 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
8:17:48 PM #14 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
8:17:48 PM #15 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
8:17:48 PM #16 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 2.4x (3,324 KB/s)
8:17:48 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:17:48 PM #18 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode
8:17:48 PM #19 Text 0 File MMC.cpp, Line 21541
Set BUFE: JustLink -> ON
8:17:48 PM #20 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes
8:17:48 PM #21 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:17:48 PM #22 SPTI -1046 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 00 00 00 00 00 00 02 60 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
8:17:48 PM #23 CDR -1046 File ThreadedTransferInterface.cpp, Line 1783
Illegal disc
D: _NEC DVD+-RW ND-6500A
8:17:48 PM #24 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1783
Could not perform start of Disc-at-once
8:17:49 PM #25 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 5/31/2005 5:36:01 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
|
|
