sum
Posts: 4
Joined: 2/25/2005 Status: offline
|
Hi, i have flashed my OEM 3520A with LD3520_1U6, now that my comptuer keep rebooting once the drive is detected on load, i have the same problem at first when i set the drive as master but the problem seems to be fixed after i switch the drive to slave, so i decided to test the drive with burning a few dvds, it runs like butter 'till it gets to the 5th dvd, the computer had crashed a blue screen came up and it rebooted itself, after the reboot i have burned another dvd no problem, i figure it must be some firmware problems.. so i decided to flash it for the better... and yet comes the nightmare.. Not only now that i have went back to the same problem that i had from the start for setting the drive on master, but now it happen even on slave.. what can do now? i can't flash the firmware anymore since it got rebooted soon as the drive had detected...dose anyone have a solution to this problem? i neeeed expert advise.. i neeeed hellppppppppppppppppp.. any of help would be greatly appreciated. peace. sum
|