stupidgenius
Posts: 1
Joined: 7/23/2006 Status: offline
|
I have a Dell Inspiron 9300 with the ND-6500A burner with Dell's 2.03d firmware installed. I've never had any problems with this burner in the past. I recently bought some new Sony DVD-R 16x media for use in all my computers, and my Dell is not able to burn to those discs. I tried some other cheap Dynex 16x discs I had laying around and those failed too. I don't have any DVD+R discs or slower DVD-R discs available to try. I have tried a Memorex 4x DVD+RW disc and it was able to burn to that. I've tried several versions of the firmware and nothing has enabled it to burn to the 16x media I have. (I know my burner only burns at 8x, but I have the 16x media because i have a 16x burner in another pc) Is there an issue with the ND-6500A that doesn't allow you to burn to 16x media? If so, can a firmware up/downgrade solve this and if so, what version? Here is my nero error log (the second dvd drive is a virtual dvd drive created by daemon tools, ignore that) ------------------------------------------ 4C82-Serial Number Removed By MP3Mogul Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 2:54:32 PM NT-SPTI used Nero Version: 7.0.0.0 Recorder: <_NEC DVD+-RW ND-6500A> Version: 203D - HA 1 TA 0 - 7.0.0.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <SZ1441P EBM794C >Version: 1.0 - HA 1 TA 1 - 7.0.0.0 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : HTS726060M9AT00 atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On CdRomPeripheral : SZ1441P EBM794C 1.0 dtscsi Port 2 ID 0 DMA: Off === CDRom-Device-Map === _NEC DVD+-RW ND-6500A D: CDRom0 SZ1441P EBM794C E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1047960kB) Free physical memory: 634MB (649280kB) Memory in use : 38 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 23.7.2006 ISO compilation 8:17:21 PM #1 Text 0 File Isodoc.cpp, Line 6410 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : FALSE 8:17:21 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 262144KB of Memory 8:17:21 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 8:17:21 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3304 First writeable address = 0 (0x00000000) 8:17:21 PM #5 Text 0 File Burncd.cpp, Line 3301 Turn on Disc-At-Once, using DVD media 8:17:48 PM #6 Text 0 File DlgWaitCD.cpp, Line 277 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 607 ( 0:08.07, 1MB) 8:17:48 PM #7 Text 0 File DlgWaitCD.cpp, Line 289 Write in overburning mode: NO (enabled: CD) 8:17:48 PM #8 Text 0 File DlgWaitCD.cpp, Line 2568 Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R Disc Manufacturer: SONY16 - D1 Disc Application Code: 64, Disc Physical Code: 193 8:17:48 PM #9 Text 0 File DlgWaitCD.cpp, Line 456 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.) 8:17:48 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 846 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 608 (608) = #608/0:8.8 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 608 blocks [D: _NEC DVD+-RW ND-6500A] -------------------------------------------------------------- 8:17:48 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1058 Prepare recorder [D: _NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1245184, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 608 | lead-out | 1 | 0x41 | 0x00 8:17:48 PM #12 Text 0 File SCSIPassThrough.cpp, Line 34 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 8:17:48 PM #13 Phase 24 File dlgbrnst.cpp, Line 1724 Caching of files started 8:17:48 PM #14 Text 0 File Burncd.cpp, Line 4129 Cache writing successful. 8:17:48 PM #15 Phase 25 File dlgbrnst.cpp, Line 1724 Caching of files completed 8:17:48 PM #16 Phase 36 File dlgbrnst.cpp, Line 1724 Burn process started at 2.4x (3,324 KB/s) 8:17:48 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2669 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:17:48 PM #18 Text 0 File DVDR.cpp, Line 2469 Recording mode: Sequential Recording Mode 8:17:48 PM #19 Text 0 File MMC.cpp, Line 21541 Set BUFE: JustLink -> ON 8:17:48 PM #20 Text 0 File DVDR.cpp, Line 2624 Start write address at LBA 0 DVD high compatibility mode: Yes 8:17:48 PM #21 Text 0 File Cdrdrv.cpp, Line 8385 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 8:17:48 PM #22 SPTI -1046 File SCSIPassThrough.cpp, Line 306 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 00 00 00 00 00 00 02 60 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 8:17:48 PM #23 CDR -1046 File ThreadedTransferInterface.cpp, Line 1783 Illegal disc D: _NEC DVD+-RW ND-6500A 8:17:48 PM #24 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1783 Could not perform start of Disc-at-once 8:17:49 PM #25 Phase 38 File dlgbrnst.cpp, Line 1724 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 5/31/2005 5:36:01 PM (Prassi/Veritas driver for win 2K) File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
< Message edited by MP3Mogul -- 7/26/2006 6:48:06 AM >
|