jose_10000
Posts: 3
Joined: 5/3/2006 Status: offline
|
Hello, I usually burn data DVDs with Nero in order to clean space in my hard drive. A few month ago I had a problem which I thought was an isolated case, but it has happened again. When burning DVDs, they stop at a certain point and an error message appears, everytime at the same point for the same project. This same problem appears when doing a speed test. Using CopyToDVD to burn the files and Beyond Compare 2 to check them with the original ones I was able to isolate the problem to a single file, which was the only one that didn't matched with the original. By removing it from the project there was no error. And when I tried to burn it alone, even to an ISO file, the error appeared. Now I have the same issue, but with different files. I would like to know if someone has found something like this, and was able to tell which file was giving problems through an easier way. Or even if there is a way to fix these files so they can be burnt. Here is a log of a "burning" attempt as an ISO of the first file: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 28/05/2003 06:53:46 p.m. ahead WinASPI: File 'D:\Archivos de programa\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 01:54:32 p.m. NT-SPTI used Nero Version: 7.2.0.3 Internal Version: 7, 2, 0, 3 (Nero Express) Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 7.2.0.3 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <HL-DT-ST CD-RW GCE-8525B >Version: 1.05 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : ST380020A atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-RW GCE-8525B atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST CD-RW GCE-8525B E: CDRom0 HL-DT-ST DVDRAM GSA-4163B F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1022MB (1047344kB) Free physical memory: 481MB (492980kB) Memory in use : 52 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 7.6.2006 ISO compilation 12:39:04 a.m. #1 Text 0 File Isodoc.cpp, Line 6424 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 12:39:04 a.m. #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 192KB of Memory 12:39:04 a.m. #3 Text 0 File Reader.cpp, Line 124 Reader running 12:39:04 a.m. #4 Text 0 File Writer.cpp, Line 113 Writer Image Recorder running 12:39:04 a.m. #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 12:39:04 a.m. #6 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 12:39:04 a.m. #7 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 13199 ( 2:55.74, 25MB) 12:39:04 a.m. #8 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 12:39:04 a.m. #9 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:39:04 a.m. #10 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 13200 (13200) = #13200/2:56.0 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 13200 blocks [Image Recorder] -------------------------------------------------------------- 12:39:06 a.m. #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 27033600, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 13200 | lead-out | 1 | 0x41 | 0x00 12:39:06 a.m. #12 Phase 65 File dlgbrnst.cpp, Line 1730 Burn process started 12:39:06 a.m. #13 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:39:16 a.m. #14 TRANSFER -25 File Reader.cpp, Line 364 Error reading data 12:39:16 a.m. #15 Text 0 File Reader.cpp, Line 367 Exception value: -1 12:39:16 a.m. #16 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:39:17 a.m. #17 Phase 67 File dlgbrnst.cpp, Line 1730 Burn process failed Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 28/05/2003 06:53:46 p.m. File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 01/06/2006 05:11:06 p.m. (Prassi/Veritas driver for win 2K) File 'Drivers\IdeBusDr.sys': Ver=2.3.0.2160, 10/01/2002, size=13891 bytes, created 15/10/2002 12:00:00 a.m. (Adapter driver for src) File 'Drivers\IdeChnDr.sys': Ver=2.3.0.2160, 10/01/2002, size=101431 bytes, created 15/10/2002 12:00:00 a.m. (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|