Hi all! ;-)
I recently bought:
LiteOn/JLMS LTD-166S/XJ-HD166
Plextor PX708A
So i wanted to conduct some Writing-Quality-Tests with KProbe.
I downloaded 1.1.26, which seems to be the most recent version.
My results seem far too good for CDR and very bad for DVD. I set
the ECC to 8 (according to the recommendations of the german
computer magazine c't). I also scanned with ECC set to 1 (still the values are way too high at least by a factor 5).
Please Comment.
Fujifilm DVD+R burned @ 2.4 with ECC set to 1
http://www.unet.univie.ac.at/~a9525538/fuji-ricoh--px708a-2-4--kprobe1126-ecc1.gif same DVD but with ECC set to 8
http://www.unet.univie.ac.at/~a9525538/fuji-ricoh--px708a-2-4--kprobe1126-ecc8.gif Verbatim Datalife burned @ 16
http://www.unet.univie.ac.at/~a9525538/verbatim--px708a-16--kprobe1126.gif P.S. The Verbatim was bought from Amazon and has an really odd ATIP:
ATIP: 97m 24s 01f
Disc Manufacturer: Taiyo Yuden Company Ltd.
Reflective layer: Dye (Long strategy; e.g. Cyanine, Azo etc.)
Media type: CD-Recordable
Recording Speeds: min. unknown - max. unknown
nominal Capacity: 702.83MB (79m 59s 72f / LBA: 359847)
I tested a few other CDRs (burned with differnt Writers and Speeds)
and ALL have similar low C1 values (avg<0.005)
Edited due to forum being unable to have links with brackets