Pioneer 108 Jitter/PI/PIF Help Please (Full Version)

All Forums >> [Optical Storage Software] >> DVDInfoPro

Message

---

baj -> Pioneer 108 Jitter/PI/PIF Help Please (12/7/2004 9:16:48 AM) Hi I'm new to all this and would greatly appreciate some help and answers. Using DVDinfoPro (version 3.48) to check the quality of dvd-r discs that I have dubbed using a Panasonic DMR-E85 HDD-DVR, produces messages that my existing Plextor DVD-rom is not suitable for Jitter, PI/PIF tests and is unable to read MID codes. I wish to buy a DVD burner (internal, ATAPI interface) and the Poineer DVR 108 appears to be a good buy. Questions: 1. Will the DVR 108 read MID codes? 2. Will it also allow me to perform jitter and PI/PIF tests? 3. What is the difference between PIF and PO? Many thanks in anticipation of answers and help. Baj

---

emperor -> RE: Pioneer 108 Jitter/PI/PIF Help Please (12/7/2004 4:33:53 PM) Answers: 1. Yes all PC DVD drives can read MID codes 2. As far i remember, DVR-108 supports only PI/PIF scans, not Jitter 3. Check the writing quality of this forum POF are un-correctable errors

---

baj -> RE: Pioneer 108 Jitter/PI/PIF Help Please (12/8/2004 5:52:50 AM) emperor, Many thanks for your reply. One last (hopefully) question: Would you agree that jitter measurements are not much use? TIA Baj

---

emperor -> RE: Pioneer 108 Jitter/PI/PIF Help Please (12/8/2004 8:37:24 AM) Jitter measurements are useful, Pio 108 cannot report such values

---

Page: [1]

Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI

3.100586E-02