Problem with Memory Timings (Full Version)

All Forums >> [PC hardware] >> Motherboards/CPU


major9686 -> Problem with Memory Timings (5/25/2008 3:56:16 AM)

Hello :)
Its been a while since Ive been here ...
Ive bought new PC parts some time ago ..
I have trouble with the motherboard\memory sticks EPP timings ..
OCZ DDR2 PC2-6400
I cant manage to get the memories timings to 4-4-4-15
can any1 help me ??
I have GA-MA69G-S3H  motherboard
The memories support up to 2.15v without ruin the lifetime warranty ..
it says that in order to get 4-4-4-15 timings u need 2.1v ..
I tried it but couldnt get it to work :(
is there some program that helps u set it from the windows or do u have to do it from the BIOS ?
Ive already tried with the bios.. I think u need to press CTRL+F1 or something like that ..
on the motherboard specs. it says : Supports 1.8V DDR2 DIMMs ...
does that means it supports DIMMs that goes as low as 1.8 .. or is it that it cant go over\support DIMMs that require more than 1.8v ?

SithTracy -> RE: Problem with Memory Timings (6/3/2008 9:48:58 AM)

Hey major9686, how are ya?  Been out of town for bereavement for a bit.

Does not appear that your memory (OCZ2RPR800C44GK) is on the supported list for the system board you have (but the list they have online may be old).  Try OCZ support and see if they are familiar with that board.  The only thing I would suggest is try a BIOS upgrade.

Page: [1]

Valid CSS!

Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI