I am successfull making a backup copy of Black and White, the games installs OK but slow. When I try and run it the opening splash screen takes about 10 times longer and when I hit the play button it just loads forever until I terminate the program.

I have a sony CRX140E CDRW that I use to read and write with. These are the settings I use:
- Read sub channel data from data and audio is "on", everything else is off.
- Read speed is 1X
- Write speed is 1X with the mode set at RAW DAO
- Amplify weak sectors is on.

Any suggestions.

could be media problem and also if you have a slow reader.try different media,that might help also sometimes the encryption is not properly copied try reading and writing again

ks

(in reply to zman)

olli has stated at cloneclinic that those sony models won't produce a good copy of sd2 even using amplify weak sectors. your only solution it to use unsafedisk or a no-cd patch. many have also reported that betablocker doesn't work with those drives either.

___________
netman
netman@cdrtimes.net

Edited by - netman on 01/01/2002 17:16:46

(in reply to zman)