Zeitgeist
Posts: 16
Joined: 10/29/2001 From: USA Status: offline
|
Hi all, I just got my new Plextor 2410! I was anxious to test the burners capabilities, so I loaded the Plextools & the latest version of CloneCD. I successfully burned a backup copy of Disk 1 of MS Flight Simulator 2000 right out of the box (no settings changed from default). I was really excited. I then tried to burn a backup of Disk 2 & it appeared to copy perfectly, but looks were decieving. When trying to load the software, disk 1 loaded fine but when I inserted disk 2 as prompted by the install program, the counter loaded up to 94% & then stopped responding. After waiting 15 mins I had to eject the disk & hit esc in order to stop the lockup. The light on the reader was blinking fast. I tried to burn the disk again using Clony's safedisk recomendations of "Fast error Skip" but the next disk stopped responding at 84%. I've finally turned the read speed down to 4x, kept fast error skip selected & turned the burn speed down to 8x, but the latest copy only loads up to 96% & then freezes. I've tried my original FS2K disk 2 with my backup disk 1 & the load went without flaw! I'm stumped - both disks have the same encryption don't they? Why would one CD of the same set clone properly & the other not? Also, Clony detects the disks as Safedisk 1, while CloneCD Games Database detects it as safedisk 2 - which is correct? Are the settings the same anyway? Am I doing something wrong? Should I set the read speed even lower? Should I try the new "Amplify Weak Sectors" setting (I'll have to hack the registry since I'm in the US). Sorry for the long post but I'm at a loss. Please Help.. Thank you in advance Z
|