rookie7
Posts: 5
Joined: 4/12/2005 Status: offline
|
I tried burning with nero 6.6.0.12 it also says burn process failed here is the log. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.12 Internal Version: 6, 6, 0, 12c (Nero Express) Recorder: <_NEC DVD+-RW ND-6500A> Version: 2.N0 - HA 1 TA 0 - 6.6.0.12 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <_NEC DVD+-RW ND-6500A>Version: 2.N0 - HA 1 TA 0 - 6.6.0.12 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : TOSHIBA MK8026GAX atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === _NEC DVD+-RW ND-6500A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 990MB (1014192kB) Free physical memory: 501MB (513524kB) Memory in use : 49 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 17.4.2005 ISO compilation 9:04:41 AM #1 Text 0 File Isodoc.cpp, Line 6194 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 9:04:41 AM #2 Text 0 File Reader.cpp, Line 127 Reader running 9:04:41 AM #3 Text 0 File Writer.cpp, Line 122 Writer _NEC DVD+-RW ND-6500A running 9:04:41 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 9:04:41 AM #5 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using DVD media 9:04:42 AM #6 Text 0 File DlgWaitCD.cpp, Line 260 Last possible write address on media: 4173823 (927:30.73, 8151MB) Last address to be written: 4071839 (904:51.14, 7952MB) 9:04:42 AM #7 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 9:04:42 AM #8 Text 0 File DlgWaitCD.cpp, Line 2339 Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD+R9 Double Layer 9:04:42 AM #9 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:04:42 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 4071840 (4071840) = #4071840/904:51.15 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4071840 blocks [_NEC DVD+-RW ND-6500A] -------------------------------------------------------------- 9:04:43 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [_NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8339128320, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 4071840 | lead-out | 1 | 0x41 | 0x00 9:04:43 AM #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 9:04:45 AM #13 Text 0 File Burncd.cpp, Line 4037 Cache writing successful. 9:04:45 AM #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 9:04:45 AM #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 9:04:45 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:04:45 AM #17 Text 0 File DVDPlusDualLayer.cpp, Line 430 Disc finalized, LBA total Image size: 4071840 (7952MB), Last LBA L0: 2035935 (3976MB) 9:04:45 AM #18 Text 0 File DVDPlusDualLayer.cpp, Line 519 L0 Data Zone Capacity set to 2035936 (1F10E0h, 3976MB) -> OK, confirmed setting 9:04:45 AM #19 CDR -1205 File DVDPlusDualLayer.cpp, Line 544 Burning Layer 1 9:04:45 AM #20 Text 0 File DVDPlusDualLayer.cpp, Line 552 Start writing layer 1 at address 0 (0h) 9:04:45 AM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06F00600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 9:04:45 AM #22 Text 0 File DVDR.cpp, Line 5955 Book Type counter: 500, Book Type selected in EEPROM, command version 2 9:04:45 AM #23 Text 0 File DVDR.cpp, Line 5955 Book Type counter: 500, Book Type selected in EEPROM, command version 2 9:04:45 AM #24 Text 0 File DVDR.cpp, Line 5955 Book Type counter: 500, Book Type selected in EEPROM, command version 2 9:04:45 AM #25 Text 0 File DVDR.cpp, Line 5071 Drive: _NEC DVD+-RW ND-6500A Book Type request [NEC]: DVD-ROM, write to RAM select Book Type setting from RAM Changing the Book Type was finished successfully, return code 0 9:04:45 AM #26 CDR -1207 File DVDR.cpp, Line 4777 Book Type automatically set to: DVD-ROM 9:04:45 AM #27 Text 0 File DVDPlusRW.cpp, Line 648 Start write address at LBA 0 DVD high compatibility mode: Yes 9:04:49 AM #28 SCSI -1046 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x068B0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 9:04:49 AM #29 CDR -1046 File Writer.cpp, Line 311 Illegal disc 9:04:49 AM #30 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 9:04:49 AM #31 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 9:04:49 AM #32 SCSI -1046 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 9:04:49 AM #33 SCSI -1046 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 9:04:49 AM #34 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 9:04:49 AM #35 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 9:04:49 AM #36 Text 0 File DVDR.cpp, Line 5955 Book Type counter: 500, Book Type selected in RAM, command version 2 9:04:50 AM #37 Text 0 File DVDR.cpp, Line 5955 Book Type counter: 500, Book Type selected in RAM, command version 2 9:04:50 AM #38 Text 0 File DVDR.cpp, Line 5071 Drive: _NEC DVD+-RW ND-6500A Book Type request [NEC]: DVD-ROM, write to RAM select Book Type setting from RAM Changing the Book Type was finished successfully, return code 0 9:04:50 AM #39 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created 11/17/2004 9:16:48 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 3/13/2005 11:05:05 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 2:59:42 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) HELP ME!!
|