HonestAgent
Posts: 3
Joined: 6/5/2003 From: USA Status: offline
|
Fellow Sufferers, Perhaps you can help me? Running InCD 4.0.1.0 on XP with SP1 on machine with AMD XP 1700 processor,VIA KT-266 chipset, NEC NR-7700A CD-RW. I've disabled XP "Desktop CD Recording" from the Properties menu for the CD in the drive. I formatted the disk Memorex CD-RW 700MB 4x with InCD. I wrote to it yesterday and filled it about 25%. Today, on boot, the properties for the CD says it's 100% full (and it's not),and when I tried to delete a file, I got the message that the file was read only. So...I manually tweaked the property of the file & tried to delete it and got a failure. Finally, the InCD tray icon has flakey behavior. When I first put the CD into the drive, I get the blank icon; briefly it turns green with the check (indicating ok to write to it), then autoplay starts (though I disabled it from the properties) and once that happens the green check light goes out and InCD is blank. I know you guys are busy, busy, but if you can help, I would greatly appreciate it.
_____________________________
CDGuy
|