Hello
I got some strange error messages when i tried to burn a dvd image using nero 7 , it got to about 60 % then i got the errors , i can't remember the error but i saved the log file of nero ... here it is :


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 9/25/2005 7:11:20 PM

NT-SPTI used
Nero Version: 7.0.0.0
Recorder: Version: 2.5a - HA 1 TA 0 - 7.0.0.0
Adapter driver: HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: Version: 2.5a - HA 1 TA 0 - 7.0.0.0
Adapter driver: HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC25N080ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DW-U55A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
SONY DVD RW DW-U55A E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523056kB)
Free physical memory: 239MB (245356kB)
Memory in use : 53 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.5.2006
Burn DVD Image
4:08:40 PM #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory

4:08:40 PM #2 Text 0 File Reader.cpp, Line 124
Reader running

4:08:40 PM #3 Text 0 File Writer.cpp, Line 113
Writer E: SONY DVD RW DW-U55A running

4:08:40 PM #4 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media

4:08:41 PM #5 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 494749 (109:56.49, 966MB)

4:08:41 PM #6 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)

4:08:41 PM #7 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: SONY DVD RW DW-U55A, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193

4:08:41 PM #8 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:08:41 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 494750 (494750) = #494750/109:56.50
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 494750 blocks [E: SONY DVD RW DW-U55A]
--------------------------------------------------------------

4:08:41 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: SONY DVD RW DW-U55A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1013248000, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
494750 | lead-out | 1 | 0x41 | 0x00

4:08:41 PM #11 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

4:08:41 PM #12 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started

4:08:41 PM #13 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.

4:08:41 PM #14 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed

4:08:41 PM #15 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 4x (5,540 KB/s)

4:08:41 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

4:08:41 PM #17 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode for Multisession

4:08:41 PM #18 Text 0 File MMC.cpp, Line 21541
Set BUFE: Power-Burn -> ON

4:08:41 PM #19 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes

4:08:41 PM #20 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

4:12:49 PM #21 SPTI -1135 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x08
CDB Data: 0x2A 00 00 04 88 E0 00 00 20 00 00 00
Sense Area: 0xF0 00 03 00 04 80 20 12 00 00 00 00 0C 08
Buffer x04ab0000: Len x10000
0x1A 7D 96 07 6D F3 5D 75 EC BD 97 AE 2B 27 C3 C3
0xAA F8 BF C7 FD 7B 2E C5 7A 28 3F 8C F2 59 63 5E
0x42 87 BD DF 58 C7 1A 79 78 09 93 16 DB 3E ED 80

4:12:49 PM #22 CDR -1135 File Writer.cpp, Line 302
Write error
E: SONY DVD RW DW-U55A

4:12:49 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:12:50 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

4:12:50 PM #25 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was 297183

4:12:50 PM #26 Phase 133 File dlgbrnst.cpp, Line 1724
Writing short lead-out

4:12:58 PM #27 SPTI -1093 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0xF1 00 03 00 04 80 20 12 00 00 00 00 02

4:12:58 PM #28 SPTI -1176 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 01 02 00 00 03 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 72 04 00 C9 00 02

4:12:58 PM #29 CDR -1093 File WriterStatus.cpp, Line 167
No seek complete
E: SONY DVD RW DW-U55A

4:12:58 PM #30 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

4:12:58 PM #31 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 4x (5,540 KB/s)


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

i imagine the problem here is the combination of recorder and used media, try to upgrade firmware and use other media

(in reply to CyberTroniX)

I have a similar problem I believe to be with Nero 7. In the Log file it says:

#23 CDR -1135 File Writer.cpp, Line 302 Write error
E: Sony DVD RW DW-Q58A

I have been unable to make DVDs properly. I have tried using a different PC (using Nero 7 again) and also an external DVD writer and still have problems of a similar nature. It often gets to the 'Lead-Out' stage and then the burning fails. Sometimes it will get through the entire DVD writing process without showing any errors however when testing the DVD in various players, it tends to cause read errors from 1/2 way through the film onwards.

Any help or advice would be greatly appreciated!

Thanks

(in reply to CyberTroniX)

Try different media.

(in reply to andrewsweenie)

I have tried using my laptop, my PC (Sony and Philips drives) and also using an external drive. I have also used 3 or 4 different brands of DVDs and have the same problem. Since I have used nero 7 for all of these times, I'm begining to think that possibly its something to do with the program or a conflict or something?!

(in reply to MP3Mogul)

I'm having problems with DVD burning also. I am still testing with different media and will give results later. One thing has worked on most I've tried and that is to dissable DVD high compatibility mode. Please try this with a simulation and let me know if that works.

(in reply to andrewsweenie)

I have no problem with DVD high compatability mode, I always have it ticked in the box.   We have a NEW version of Nero to be released within days.

(in reply to jorge242)

I tried dissabling DVD high compatibility mode and it worked (mostly) for one DVD which had a few minor glitches in when played on a DVD player but much better than before, however I tryed burining a different DVD and the same problem occured. The wierd thing is, Nero doesn't register the burning as failed or having an error (hence the simulation shows no problems) but when i test play it in different DVD players, it causes read errors normally half-way onwards through the DVD.

I have also had problems burning data dvds with Nero but it does say that an error occurs which I suppose is something!

When I use different software I sometimes have problems similar to above but not always which initially made me think it was my DVD writer on my laptop, hence I bought one for my PC but I have identical problems.

It's driving me nuts!!!!!

(in reply to jorge242)

What media are you using.  This sounds exactally like a "cheap" media problem.  I suggest getting and trying some verbatim media.

(in reply to andrewsweenie)

I'm using 'Datawrite Classic 8x general Purpose DVD-R'

I tried using Infiniti discs.........true I only used them to burn data dvds using nero when nero displayed an error every time at the 'lead-out' stage.

(in reply to MP3Mogul)

...Also.....I thought it a bit wierd that the DVDs always have the read errors at the exact same areas of the film in all of my attempts. If it was a media problem, surely it wouldn't be as consistent as that??

(in reply to MP3Mogul)

I've tried Nero 7 (all builds prior to 7/1/2006) on 3 separated WinXP Pro boxes, each with a different DVD combo burner, and several brands of DVD-R's and DVD+R's (TDK, Verbatim, Memorex, Ridata, and Pengo). All Nero 7 burns have failed with various but similar error messages, but always on the lead-out phase. 1 burn failure msg stated something similar to "not enough destination disk space" (i.e. the DVD blank), yet the data source was only approx 3GB. All other burns have had source sizes between half and the disc's capacity. It seems that Nero 7 has 2 common problem patterns that I've seen:

1. It's miscalculating disc capacity
2. It's trying to somehow "expand" the source content so it fills the entire physical disc. (Go figure.)

All burns are once again perfect after reverting back to Nero 6 on each machine.

(in reply to andrewsweenie)