CDSpeed/PlexTools Scans - Page 5

In order to test the writing quality and readability of the burned media we used two readers with two software applications:

• The LiteON SOHD-167T with patched firmware being able to read DVD5 up to 16X CAV and DVD9 up to 10X CAV. For the transfer rate tests we used the latest Nero CDSpeed version.
• The Plextor PX-712A with the latest available firmware. For scanning the disc, we used the latest PlexTools version 2.18 at 2X CLV reading speed, BURST mode, with middle accuracy.

In general, a "perfect" disc should have a smooth reading curve, very low PIE/POE and zero (0) POF error rates. Most times however, even though a disc has very low PIE/POE error rates, the reading curve may not be smooth containing dropoffs. Due to the fact that we oversped the reading capabilities of the LiteON SOHD-167T, such drops are expected, especially near the outer area of the disc.

The measurements below should be taken not as the absolute criteria of the burning quality, but as an indication level.

12X DVD+R Writing Speed

• Ricoh 8X DVD+R @ 12X

- Summary

DVD recording at 12X was supported by only one media brand from among the discs we tested. High PI error levels were reported, but we cannot give a good or bad ruling for the drive from only one media test result. Unfortunately, according to the media support list for the MP5316DAl, no other media is supported at 12X at this time. However, we will test 12X writing further with more +R discs when future firmware releases arrive. You can always check our forum for these burning quality results.