quote:
Originally posted by stephensch
Whoops! I forgot the file in the above post. So, here it is.
Stephen
...
10:40:43 PM #56 SCSI -1135 File Cdrdrv.cpp, Line 1381
SCSI Exec, HA 2, TA 4, LUN 0, buffer 0x03190000 ...
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Stephensch: I have the same problem as yours. If you study your log file carefully, I think the most significant lines are the lines I quoted above (they are closest to the error); they are different than those of other posters here. I got the same errors in the log; namely, SCSI_TASTATUS_CHKCOND followed by KEY_MEDIUM_ERROR (log attached below).
In my case, until two weeks ago everything was going fine, for the last six months I've been burning happily at 40x. Then suddenly, I started getting the errors mentioned here. Standard recommended tweaks (autorun=0, no dma) didn't help, even when I reduce burn speed to 8x. Can someone help? Stepehsch? Craig CCampbell?
Thanks
JackAren
Below is the log file
===================================================================================
Windows 2000 5.0
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=16384 bytes, created 8/24/1996 11:11:00 AM
ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 4/14/2003 12:18:56 AM
Nero Version: 5.5.9.9
Recorder: <PLEXTOR CD-R PX-W4012A>Version: 1.05 - HA 1 TA 0 - 5.5.9.9
Adapter driver: <atapi> HA 1
Drive buffer : 4096kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PLEXTOR CD-R PX-W4012A>Version: 1.05 - HA 1 TA 0 - 5.5.9.9
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD200BB-00AUA1 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST34321A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PLEXTOR CD-R PX-W4012A atapi Port 1 ID 0 DMA: On
TapePeripheral : TANDBERG SLR5 4/8GB =09: asc Port 2 ID 2 DMA: ?
=======================
AutoRun : 0
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 68157440 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 575MB (589368kB)
Free physical memory: 66MB (68516kB)
Memory in use : 88 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: Off
17.4.2003
CD-ROM (ISO)
8:11:06 PM #1 Text 0 File Isodoc.cpp, Line 6003
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 2 / XA
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
8:11:06 PM #2 Phase 72 File dlgbrnst.cpp, Line 1566
BURN-Proof activated
8:11:06 PM #3 Text 0 File Reader.cpp, Line 118
Reader running
8:11:06 PM #4 ISO9660GEN -11 File geniso.cpp, Line 4488
First writeable address = 0 (0x00000000)
8:11:07 PM #5 Text 0 File Writer.cpp, Line 134
Writer PLEXTOR CD-R PX-W4012A running
8:11:07 PM #6 Text 0 File Burncd.cpp, Line 3542
Turn on Track-At-Once, using CD-R/RW media
8:11:07 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 663
Setup items (original item values)
0: TRM_DATA_MODE2_FORM1_NOSUB (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 356030 (356030) = #356030/79:7.5
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
8:11:50 PM #8 Text 0 File DlgWaitCD.cpp, Line 199
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 356029 (79:09.04)
8:11:50 PM #9 Text 0 File DlgWaitCD.cpp, Line 204
Write in overburning mode: FALSE
8:11:50 PM #10 Text 0 File DlgWaitCD.cpp, Line 1403
Recorder: PLEXTOR CD-R PX-W4012A;
CDRW code: 00 97 27 19; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1B 13 (LI 97:27.19), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
8:11:50 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 815
Prepare recorder PLEXTOR CD-R PX-W4012A for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x20 Close CD
Tracks 1 to 1:
TRM_DATA_MODE2_FORM1_NOSUB, 2048/0x0, ISRC "", FilePos 0 307200 729456640
8:11:50 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 843
Removed 2 run-out blocks from end of track 1.
8:11:50 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 663
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_FORM1_NOSUB (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 356030 (356030) = #356030/79:7.5
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE2_FORM1_NOSUB, 2048, config 0, wanted index0 0 blocks, length 356028 blocks [PLEXTOR CD-R PX-W4012A]
--------------------------------------------------------------
8:11:50 PM #14 Phase 24 File dlgbrnst.cpp, Line 1566
Caching of files started
8:13:34 PM #15 Phase 25 File dlgbrnst.cpp, Line 1566
Caching of files completed
8:13:34 PM #16 Phase 28 File dlgbrnst.cpp, Line 1566
Speed measurement started
8:13:34 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1947
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
8:15:38 PM #18 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
8:15:38 PM #19 Phase 29 File dlgbrnst.cpp, Line 1536
Speed measurement completed: 41.6x (6,240 KB/s)
8:15:38 PM #20 Phase 36 File dlgbrnst.cpp, Line 1566
Burn process started at 16x (2,400 KB/s)
8:15:38 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 1947
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
8:15:39 PM #22 Text 0 File Mmc.cpp, Line 16957
Set BUFE: BURN-Proof -> ON
8:17:05 PM #23 SCSI -1135 File Cdrdrv.cpp, Line 1415
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02EA0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x07
CDB Data: 0x2A 0x00 0x00 0x01 0x3A 0x1E 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x01 0x3A 0xB4 0x0A
0x00 0x00 0x00 0x00 0x0C 0x07
8:17:05 PM #24 MMC -1135 File Writer.cpp, Line 335
Write error
8:17:06 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
8:17:06 PM #26 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader
8:17:17 PM #27 CDR -201 File WriterStatus.cpp, Line 188
Invalid write state
8:17:17 PM #28 TRANSFER -18 File WriterStatus.cpp, Line 188
Could not perform EndTrack
8:17:36 PM #29 Phase 38 File dlgbrnst.cpp, Line 1566
Burn process failed at 16x (2,400 KB/s)
8:17:36 PM #30 Text 0 File Scsicmd.cpp, Line 395
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 2/1/2003 9:16:37 AM
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 2/1/2003 9:16:37 AM
File 'Drivers\atapi.sys': Ver=5.00.2195.2247, size=85264 bytes, created 5/4/2001 1:05:02 PM (Adapter driver for rec)
File 'Drivers\atapi.sys': Ver=5.00.2195.2247, size=85264 bytes, created 5/4/2001 1:05:02 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)