Archivarius -> RICOH MP7200A to MP7240A (3/14/2003 4:38:41 AM)
|
Ricoh MP7200A -> Ricoh MP7240A firmware "upgrade". It works great! All almost same as described in "OC" article about Ricoh 7063A, but for this case use algorithm, shown here: - download both the firmwares for the MP7200A and MP7240A drives. - download flashing software (RFlash_602.exe) - extract both firmware and a copy of RFlash_602.exe into a directory - the MP7200A firmware filename is S00a130.bin while the MP7240A firmware filename is R24ao208.bin - start up RFlash_602.exe - select your MP7200A burner from the "Target Drive" drop down menu - select the S00a130.bin file from the "Source File" drop down menu - tick the "Back Up current F/W" box to save your current firmware, just in case - press the "Next" button - before you press the "Start" button, go to the directory where you saved the firmware files - rename the MP7200A firmware (S00a130.bin) to something else (for example, S00a130.bin.old) - rename the MP7240A firmware (R24ao208.bin) to S00a130.bin - press the "Start" button and it should proceed with the upgrade - after the upgrade has finished, shut down your computer for a couple seconds, then start it up again - now you "upgraded" your MP7200A to a MP7240A [8D] IMPORTANT NOTE: do not try this procedure to upgrade your RICOH MP7200A to MP7320A it don't work and may damage drive!!!
|
|
|
|