Up'd to Nero 6.6 Now can't burn DVDs (Full Version)

All Forums >> [Optical Storage Software] >> CD/DVD Copy



Message

hotrod11 -> Up'd to Nero 6.6 Now can't burn DVDs (12/10/2004 8:11:25 AM)

I just upgraded to Nero 6.6 from 6.3 yesterday. I was able to Recode a few of my movies yesterday (which seemed much slower, but that is another thread), but more importantly when I went to burn the .nrg files with Nero Express it won't burn. I get the following errors:

Verifying disc positiion of item 0 (not relocatable, no disc, pos, no patch infos, orig at #0): target disc position #150 differs

Cannot write track at correct position with this recorder

Burn process failed.

[:(][:o]

Any ideas. Things were going very well with 6.3?



tqhoang -> RE: Up'd to Nero 6.6 Now can't burn DVDs (12/10/2004 11:03:32 AM)

What is the full version that's you're running (6.6.0.1 or 6.6.0.3)?



hotrod11 -> RE: Up'd to Nero 6.6 Now can't burn DVDs (12/10/2004 11:25:36 AM)

It was 6.6.0.1 earlier this week with no problems. I just upped to 6.6.0.3 yesterday. I'm going to try a clean install instead of an upgrade tonight. But if any one else has any ideas I'll listen.



Matthew -> RE: Up'd to Nero 6.6 Now can't burn DVDs (12/10/2004 4:57:34 PM)

"Behind" seem to have done the beta thing again with 6.6 - flaky as hell, loads of trouble - give it another release or 2 to mature.

Some people have no trouble, others plenty - it's looking like it may be a drive or configuration related problem.

Keep a close look on the items at the end of the history log - it may be even less tolerant of conflicts than 6.3 was.

I might bite the bullet and throw 6.6.0.3 in - I grabbed 6.6.0.1, but then held off after reading many trouble reports.



MP3Mogul -> RE: Up'd to Nero 6.6 Now can't burn DVDs (12/10/2004 7:04:16 PM)

I haven't experienced any problems yet with 6.6.0.3



hotrod11 -> RE: Up'd to Nero 6.6 Now can't burn DVDs (12/11/2004 8:41:25 AM)

Definately troubles here. I didn't know if it was because I performed and upgrade instead of a clean install till I did it last night twice. I even used Nero's Clean Tool. Still no go. I switched back to 6.6.0.1 and all is good. [:D]

Unfortunately I had backed up 3 movies to image files using the new version of Recode and they were all junk. Would not even play when I loaded the image file with Nero's image Drive. [:@]

STAY AWAY from 6.6.0.3 and 3.0.1.14. Junk on my computer. [:'(]



MP3Mogul -> RE: Up'd to Nero 6.6 Now can't burn DVDs (12/11/2004 12:22:16 PM)

I did just an update to 6.6.0.3 and have backed up alot of movies already, without problems. This is more than likely a hardware/driver issue that Nero hasn't ironed out yet. Report it to Nero!



skibum -> RE: Up'd to Nero 6.6 Now can't burn DVDs (12/22/2004 12:25:05 PM)

Hotrod11,

I have had exactly the same problem as you reported. I upgraded yesterday from 6.6.0.1 to 6.6.0.3 and my transcoding time jumped from 50 minutes to 3 hours.

If I burn to recorder I get the 150 problem you get, if I burn straight to DVD I it works, just takes so long.

I have tried with a Panasonic DVD-RAM and Sony D22A

I logged a call with Nero today, but no reponse yet. I have you had any luck? [&:]

Nigel



skibum -> RE: Up'd to Nero 6.6 Now can't burn DVDs (12/22/2004 1:34:58 PM)

UPDATE: Just un-installed Nero 6.6.0.3 and re-installed load 6.3.1.17 NVE2 is now going to process in 24 minutes, much better than 3 hours.. :-)



hotrod11 -> RE: Up'd to Nero 6.6 Now can't burn DVDs (12/22/2004 6:32:13 PM)

I uninstalled and when back to 6.6.0.1



jnjewlz -> RE: Up'd to Nero 6.6 Now can't burn DVDs (12/23/2004 11:10:33 AM)

quote:

ORIGINAL: hotrod11

STAY AWAY from 6.6.0.3 and 3.0.1.14. Junk on my computer. [:'(]


That's the truth. After unstall of 6.6.0.3 and 3.0.1.14 and reinstall of previous version, I was back in business.

Folks, make sure you report it to techsupport@nero.com. Attach a copy of the log file (you saved from the failed burn) and the report, generated and saved, after you run the INFOTOOL.



alex54 -> RE: Up'd to Nero 6.6 Now can't burn DVDs (12/23/2004 12:29:23 PM)

quote:

ORIGINAL: hotrod11

I just upgraded to Nero 6.6 from 6.3 yesterday. I was able to Recode a few of my movies yesterday (which seemed much slower, but that is another thread), but more importantly when I went to burn the .nrg files with Nero Express it won't burn. I get the following errors:

Verifying disc positiion of item 0 (not relocatable, no disc, pos, no patch infos, orig at #0): target disc position #150 differs

Cannot write track at correct position with this recorder

Burn process failed.

[:(][:o]

I've just had the same "cannot write track at correct position with this recorder" trying to burn .nrg image created in NERO Vision (latest updated) from tape capture. I use the latest update for NERO v.6.6.0.3. Google returned lots of complaints on this situation. Shortly speaking, after I just uninstalled InCD everything started working properly.



MP3Mogul -> RE: Up'd to Nero 6.6 Now can't burn DVDs (12/23/2004 7:32:16 PM)

Yes, definately report it to Nero, because not all drives/systems are experiencing any problem. They release fixes monthly!



lbeck -> RE: Up'd to Nero 6.6 Now can't burn DVDs (12/29/2004 9:35:39 AM)

FWIW - I've experienced most of the problems listed here, mostly after upgrading to 6.6.0.1. I have a Panasonic LF-D521 Multi burner that is about 2 years old, with maybe 1500 hours service.

I'm not positive that Nero is to blame, but lots of evidence points to that. My problems began with increasing errors with DVD-RWs, and then occasionally a DVD-R. I was running Nero 5.5 and saw a good deal on an upgrade, so I bit. I IMMEDIATELY began having more, not fewer problems burning -rws and -rs. Most errors were "target" related (e.g., "SCSI Target Error"). I contacted Nero and provided their info file and they replied with some cut-and-pasted stock answers about checking cables and connections, your burner may be bad, use only good, reliable media, etc. I've also checked to be sure that I have the latest drivers.

I've tried burning DVDs with other software and have a little better succes than Nero, but still about 75% fail rate. Funny thing is, I can read anything and can burn CDs and CD-RWs without any problems at all.

Bottom line is, I uninstalled 6.6 and went back to 5.5. My problems are slightly better but still burning lots of coasters. In my investigation, I did run into more than a couple of posts (other forums) that implicated SP2 as having problems with Nero (or visa versa). I had installed XP SP2 just prior to having my initial problems (while running 5.5). I'm still having problems sans SP2.

Having exhausted all other options, I've ordered a new burner. That may be the problem, but since all my troubles began with the update to Nero 6, thought I'd comiserate here.



Page: [1]

Valid CSS!




Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI
0.015625