DVDInfo 2.xx goes freeware and 3.07 release (Full Version)

All Forums >> [Optical Storage Software] >> DVDInfoPro



Message


emperor -> DVDInfo 2.xx goes freeware and 3.07 release (7/31/2004 8:59:36 AM)

Posted news at main page, give us your feeback [:)]




emperor -> RE: DVDInfo 2.xx goes freeware and 3.07 release (7/31/2004 9:11:45 AM)

1) When i have a blank DVD media inserted to a supported drive for PI/PO scan, the software should prompt when i press start "this function only works with burned media" or something [:)]




emperor -> RE: DVDInfo 2.xx goes freeware and 3.07 release (7/31/2004 9:14:22 AM)

2) I am using a BenQ drive, it gives me speed options, 4X/6X/8X/12X but after starting the scan, box should be gray out, despite the fact that speeds are not anyway working [;)]




emperor -> RE: DVDInfo 2.xx goes freeware and 3.07 release (7/31/2004 9:16:02 AM)

3) Maybe also PIF should be gray out when benQ drives are being used, since BenQ doesn't support PIF, i know it a flast line (0), but a warning for amateur user (why this damned line won't rise up?)




emperor -> RE: DVDInfo 2.xx goes freeware and 3.07 release (7/31/2004 9:18:07 AM)

4) Reported scanning speed with BenQ doesn't seem ok, i know it supposed to be slow, but 0.4X?




nicw -> RE: DVDInfo 2.xx goes freeware and 3.07 release (7/31/2004 9:19:58 AM)

quote:

ORIGINAL: emperor

4) Reported scanning speed with BenQ doesn't seem ok, i know it supposed to be slow, but 0.4X?


yup, its slow alright, some go faster, mine sits at 1x, another sits at 0.6x. Benq emailed me yesterday and said they are looking at speeding it up as per my request.




nicw -> RE: DVDInfo 2.xx goes freeware and 3.07 release (7/31/2004 9:22:58 AM)

quote:

ORIGINAL: emperor

3) Maybe also PIF should be gray out when benQ drives are being used, since BenQ doesn't support PIF, i know it a flast line (0), but a warning for amateur user (why this damned line won't rise up?)


Benq pif does actually work if the errors are large enough. A scan showing this is below

[image]local://upfiles/17007/D27A069FDD6F49279A80752C1940F76B.jpg[/image]




emperor -> RE: DVDInfo 2.xx goes freeware and 3.07 release (7/31/2004 9:24:22 AM)

5) I noticed that if you turn off either PI/Speed and try later to re-enable it, you need to double click it to show, doesn't appear with the first click




nicw -> RE: DVDInfo 2.xx goes freeware and 3.07 release (7/31/2004 9:24:59 AM)

quote:

ORIGINAL: emperor

2) I am using a BenQ drive, it gives me speed options, 4X/6X/8X/12X but after starting the scan, box should be gray out, despite the fact that speeds are not anyway working [;)]


Yep they dont work right now but benq have promised to look into it. I probably should have removed the box, too many things to do ;)




nicw -> RE: DVDInfo 2.xx goes freeware and 3.07 release (7/31/2004 9:26:03 AM)

quote:

ORIGINAL: emperor

1) When i have a blank DVD media inserted to a supported drive for PI/PO scan, the software should prompt when i press start "this function only works with burned media" or something [:)]


Agreed




emperor -> RE: DVDInfo 2.xx goes freeware and 3.07 release (7/31/2004 9:35:33 AM)

Here is a nice scan...Don't you agree?

benq halted at a point, at 9% and didn't proceed, so maybe if drive doesn't repspond or no error reported after sometime, lets say 2-3mins, dvdinfopro auto stop

[image]local://upfiles/16874/4CF3F1644E0F48E7ADB07E5464268824.png[/image]




MartinG -> RE: DVDInfo 2.xx goes freeware and 3.07 release (8/1/2004 2:57:00 PM)

I went from 2.60 to 3.07 and with 3.07 it doesnt display mediacode at speedtest screen.




emperor -> RE: DVDInfo 2.xx goes freeware and 3.07 release (8/1/2004 4:54:04 PM)

You mean the PI/PIF scan or transfer test?




Gradius -> RE: DVDInfo 2.xx goes freeware and 3.07 release (8/1/2004 5:52:42 PM)

Well, I found a little bug on both versions 2.6 and 3.07.

DVR-A07/107 does support DVD+R DL read feature, but on both versions it report as unable to read, please, check it out.

Gradius




emperor -> RE: DVDInfo 2.xx goes freeware and 3.07 release (8/1/2004 7:06:01 PM)

Nicw will take a look of the problems, hopefully soon [:)]




nicw -> RE: DVDInfo 2.xx goes freeware and 3.07 release (8/1/2004 9:47:56 PM)

quote:

ORIGINAL: Gradius

Well, I found a little bug on both versions 2.6 and 3.07.

DVR-A07/107 does support DVD+R DL read feature, but on both versions it report as unable to read, please, check it out.

Gradius


Thanks, as its not reported by the drive that way I will override it and show it capable of reading them. I will add this to my todo list.




Page: [1] 2   next >   >>

Valid CSS!




Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI
0.015625