i need some LTR-40125s flash help.... (Full Version)

All Forums >> [Optical Storage] >> CD, DVD, BD Drives



Message

stanger -> i need some LTR-40125s flash help.... (8/10/2002 9:11:00 PM)

i have a LTR-40125s and it came with ZSoj firmware and i upgraded it to the ZSOk. could someone tell me the steps to flash this drive to make it a 48x speed or can it be done?

thanks stanger




PorchSong -> RE: i need some LTR-40125s flash help.... (8/10/2002 10:36:51 PM)

You are so close, it hurts.

Goto to main cdrinfo page, click aticles, then overclocking, then look to index on right; click Liteon, and there you go....

BTW, I made those flashers, if you need any help, let me know.




stanger -> RE: i need some LTR-40125s flash help.... (8/10/2002 11:32:41 PM)

thanks PorchSong,

so i take it since i have flashed to the latest ZSok , then my next step would be the ZSxx to VS06 flash correct ? i guess if that is right then my next question is if i mess up some how can i go back to the previous firmware version?

thanks and nice work :)

stanger




Clint -> RE: i need some LTR-40125s flash help.... (8/11/2002 2:33:50 AM)

quote:

thanks PorchSong,

so i take it since i have flashed to the latest ZSok , then my next step would be the ZSxx to VS06 flash correct ? i guess if that is right then my next question is if i mess up some how can i go back to the previous firmware version?

thanks and nice work :)

stanger




Yes, to both questions!

_________________
You get what you pay for...

  • Questions? Problems? Search for fast results!



    PorchSong -> RE: i need some LTR-40125s flash help.... (8/11/2002 10:39:12 AM)

    These windows flashers, as far as I have seen, have not messed up your drive. The only time I have seen a bad flash was under mtkflash. but, consequently, mtkflash is the only way to bring a bad flash back again. Don't worry about the flash, if you don't like the upgrade, then use the VSxx to ZS0K and your set. If for some reason you do have a bad flash--i.e. a dead drive--do not panic as you can, without a doubt, bring the drive back. I can help you there.

    Now, there is a program out there call WSES that is dos based that has apparently erases eeprom on Liteon drives when the users does not know what he is doing. Then you are screwed. My advise, stay away from WSES usless you REALLY know what you are doing. WSES is a diag. program for your drive--it also checks crc errors, etc.




    stanger -> RE: i need some LTR-40125s flash help.... (8/11/2002 12:49:38 PM)

    thats for the great help :), just flashed it and now in the nero cdtest it now starts @ 22.16x ends @ 48.58x avg=36.97x

    before it started @ 18.84x ended @ 39.97x avg was 31.35

    this is in a P3 1gig asus cusl-2 mobo, 512mb crucial cas2 memory, running 2 harddrives off a promise ultra 100 card and lite-on as the primary master om the mobo controller and asus 50x cdrom as the secondary master on the mobo controller


    thanks again
    stanger




    Clint -> RE: i need some LTR-40125s flash help.... (8/12/2002 2:58:09 AM)



    _________________
    You get what you pay for...

  • Questions? Problems? Search for fast results!



    stanger -> RE: i need some LTR-40125s flash help.... (8/21/2002 8:13:23 AM)

    ok since everything is working great (thanks for the support ) my next question would be since i flashed the 40125s to 48x and it is being recognized as a 48125W...... when new firmware is released for the 48125W i use that now instead of the 40125s ? or do i use a different flash ?,,,BTW i used "ZSxx to VS06" is there a newer flash available than this one ?

    stanger



    Edited by - stanger on 08/21/2002 10:57:30



    PorchSong -> RE: i need some LTR-40125s flash help.... (8/23/2002 1:02:01 AM)

    When new firmware is released for LTR-48125W then yes, use new official as your drive IS a LTR-48125W.

    As for new flasher, no, the VS06 is the latest firmware out.




    flipsider -> RE: i need some LTR-40125s flash help.... (10/9/2002 3:05:02 PM)

    My firmware flashing has gone awry. Tried to go 48x, cd burner isn't detected by nero. Tried to go back, detected as 4x burner that doesn't burn. Please help.



    RyanVM -> RE: i need some LTR-40125s flash help.... (10/9/2002 6:38:40 PM)

    Porchsong, there is a VS08 firmware out now...



    john -> RE: i need some LTR-40125s flash help.... (10/9/2002 11:53:46 PM)

    quote:
    Originally posted by PorchSong

    You are so close, it hurts.
    BTW, I made those flashers, if you need any help, let me know.


    Any chance to update with the latest VS08 firmware?



    RyanVM -> RE: i need some LTR-40125s flash help.... (10/10/2002 3:19:56 AM)

    agreed it would be nice if you did that Porchsong, but on the other hand, it's not too hard to just run the VS08 flasher once the drive is upgraded to 48x :) That's what I did today.



    hoxlund -> RE: i need some LTR-40125s flash help.... (10/10/2002 6:16:24 AM)

    porchsong, you made windows based flashers?, other than the ones that liteon uses?

    i would like to take a look at them



    number9 -> RE: i need some LTR-40125s flash help.... (10/14/2002 2:39:17 AM)

    quote:
    Originally posted by flipsider

    My firmware flashing has gone awry. Tried to go 48x, cd burner isn't detected by nero. Tried to go back, detected as 4x burner that doesn't burn. Please help.


    please see my post re problems with system recognising 40125s as a burner.

    did you solve your problem? I'm not having much success with mine. If there's any advice members could offer it would be most appreciated.



    flipsider -> RE: i need some LTR-40125s flash help.... (10/14/2002 4:11:38 AM)

    I just kept flashing back and forth between different versions of the 40x firmware and 48x firmware and it seems to work now. I don't recommend you do this but just in case nothing else works it's something you could try.



    Page: [1]

    Valid CSS!




    Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI
    1.757813E-02