DVDINFOPro v3.41 can detect the burner used to create the DVD-R media

CDRInfo Forum

Forums Register Login My Profile Inbox Address Book My Subscription My Forums

Photo Gallery Member List Search Calendars FAQ Ticket List Log Out

Logged in as: Guest

Viewers: 1343

You can click here to see

Today's Posts |

Most Active Topics |

Posts Since Last Visit

Printable Version

All Forums >> [Optical Storage Software] >> DVDInfoPro >> DVDINFOPro v3.41 can detect the burner used to create the DVD-R media

Page: [1]

Message

<< Older Topic Newer Topic >>

DVDINFOPro v3.41 can detect the burner used to create t... - 10/31/2004 9:14:28 PM

Stewart

Posts: 1
Joined: 7/29/2002
From:
Status: offline

V3.41 add a new function which can detect the burner use to create the DVD-R(RW) media. Just select ADVANCED COMMANDS -> Read burn info from media DVD-R/RW , it can show the burner information. It means that when you write the DVD-R media, it also records your burner's information into the disc!

Post #: 1

RE: DVDINFOPro v3.41 can detect the burner used to crea... - 10/31/2004 9:20:41 PM

KenW

Posts: 154
Joined: 6/22/2004
Status: offline

Stewart

I might want to point out as NicW's beta tester, that this fun command, only works on some dvdrw drive not all have the command code to read the burner string. I also might want to point out that ver 3.41 is old and you really should get the newer release 3.43 it has some bug fix, and also does this little trick.

_____________________________

Intel Core2 Quad Q6600 2.4Ghz Intel D975XBX2
LG-GGW-H20L YL03
Plextor 755SA 1.08
Samsung SH-S203B SB03

(in reply to Stewart)

Post #: 2

RE: DVDINFOPro v3.41 can detect the burner used to crea... - 11/1/2004 3:30:03 PM

emperor

Posts: 7002
Joined: 4/28/2004
Status: offline

interesting, i also believe that the SN of the burner is written at the disc for tracking picary reasons

(in reply to KenW)

Post #: 3

RE: DVDINFOPro v3.41 can detect the burner used to crea... - 11/25/2004 7:57:57 AM

franz99

Posts: 135
Joined: 10/31/2004
Status: offline

Hello !
I unfortunaly started a new thread about the same subject because I did not read this one before, so I am going to join this very interesting discussion here . . .

(in reply to emperor)

Post #: 4

RE: DVDINFOPro v3.41 can detect the burner used to crea... - 11/25/2004 8:14:39 AM

franz99

Posts: 135
Joined: 10/31/2004
Status: offline

The firs "Advaced command" in DVDinfoPro, called: "Read BURN INFO from media DVD-R/RW"
gives me the following answer: and only with a DVD-R media (burned with Nero 6)

Info on burner used to create this disc
Vendor (manufacturer) // serial number // Product ("model")

The serial number remains unchanged if you flash the drive with a un-official firmware which changes the 2 other indications.

I have not been able to get any information
- from a DVD-RW burned media
- and of course from any DVD+R/+RW burned media even burned with bitsetting to DVD-ROM (Mad DOG writer with 2.F9 firmware)
Is there a planed upgrade of DVDinfoPro that will allow us to do read this information on all burned DVD discs in the near future ? (I use version 3.47 at the moment)

I wonder where exactly this information is recorded on the DVD? Is it repeated several times as one time in the "lead in" and one time in the "lead out" ?
I wonder where exactly this information is recorded on the recordable DVD? Is it repeated several times as one time in the "lead in" and one time in the "lead out" ?

Does anybody know is there is any other software around able to read this information on CD-R's ,(music compilations)

(in reply to franz99)

Post #: 5