New High-Speed Infrared Communications Protocol Developed
ITX E-Globaledge Corporation, NTT DoCoMo, Inc., Sharp Corporation and Waseda University have jointly developed IrSimple, a high-speed wireless communications protocol using infrared.
IrSimple refers to simple communications using a high-speed
infrared-based wireless communications protocol.
IrDA (Infrared Data Association), an industry organization that develops and standardizes specifications for infrared communications, has decided to formally adopt the protocol as its standard.
IrSimple achieves faster data transmission speeds (at least 4 to 10 times faster than at present) by improving the efficiency of the current infrared IrDA protocol embedded in many mobile devices such as mobile phones. In addition, the IrSimple protocol also maintains backward compatibility with the existing IrDA protocols.
Incorporating IrSimple in digital consumer electronics devices and home appliances is expected to lead to a significant expansion in applications for this new communications protocol. For example, high-resolution photographs taken with a mobile phone or digital camera can be instantly transferred to a flat-panel TV or printer through a simple operation, similar to that of using a remote control unit.
Main Features of IrSimple:
- Faster data transmission speeds (at least 4 to 10 times faster than existing protocols)
- Improved efficiency of the protocol by reducing latency until a receiver/transmitter pair is ready to communicate
- Implementing IrSimple can be done by adding and/or upgrading software for existing IrDA protocols
- Backward compatiblity with existing IrDA-enabled communications incorporated into devices or equipment
Below you can see a comparison of the currently available IrDA protocols with IrSimple. The transfer times where measured when transferring a 2-megapixel image (approximately 500K bytes).
IrSimple - 4M protocol --- Approx. 1 second
IrDA - 4M protocol --- Approx. 1 to 11 seconds
IrDA - 115K protocol --- Approx. 50 to 100 seconds
Note that both IrSimple 4M and IrDA 4M protocols use the FIR (Fast IrDA) specification for the speed of the physical layer (up to 4 Mbps).
Also the IrDA 115K protocol uses the SIR (Serial Infrared) specification for the speed of the physical layer (up to 115.2 kbps), which is currently incorporated in many mobile phones.
IrDA (Infrared Data Association), an industry organization that develops and standardizes specifications for infrared communications, has decided to formally adopt the protocol as its standard.
IrSimple achieves faster data transmission speeds (at least 4 to 10 times faster than at present) by improving the efficiency of the current infrared IrDA protocol embedded in many mobile devices such as mobile phones. In addition, the IrSimple protocol also maintains backward compatibility with the existing IrDA protocols.
Incorporating IrSimple in digital consumer electronics devices and home appliances is expected to lead to a significant expansion in applications for this new communications protocol. For example, high-resolution photographs taken with a mobile phone or digital camera can be instantly transferred to a flat-panel TV or printer through a simple operation, similar to that of using a remote control unit.
Main Features of IrSimple:
- Faster data transmission speeds (at least 4 to 10 times faster than existing protocols)
- Improved efficiency of the protocol by reducing latency until a receiver/transmitter pair is ready to communicate
- Implementing IrSimple can be done by adding and/or upgrading software for existing IrDA protocols
- Backward compatiblity with existing IrDA-enabled communications incorporated into devices or equipment
Below you can see a comparison of the currently available IrDA protocols with IrSimple. The transfer times where measured when transferring a 2-megapixel image (approximately 500K bytes).
IrSimple - 4M protocol --- Approx. 1 second
IrDA - 4M protocol --- Approx. 1 to 11 seconds
IrDA - 115K protocol --- Approx. 50 to 100 seconds
Note that both IrSimple 4M and IrDA 4M protocols use the FIR (Fast IrDA) specification for the speed of the physical layer (up to 4 Mbps).
Also the IrDA 115K protocol uses the SIR (Serial Infrared) specification for the speed of the physical layer (up to 115.2 kbps), which is currently incorporated in many mobile phones.
