In order to test the writing quality and readability of the burned media, we used two readers with two software applications:

- The LiteON SOHD-167T with patched firmware being able to read DVD5 up to 16X CAV and DVD9 up to 10X CAV. For the transfer rate tests we used the latest Nero CDSpeed version.

- The Plextor PX-716A with the latest available firmware. For scanning the disc, we used the latest PlexTools version at 2X CLV reading speed, BURST mode, with middle accuracy.

In general, a "perfect" disc should have a smooth reading curve, very low PIE/POE and zero (0) POF error rates. Most times however, even though a disc has very low PIE/POE error rates, the reading curve may not be smooth containing dropoffs. Due to the fact that we oversped the reading capabilities of the LiteON SOHD-167T, such drops are expected, especially near the outer area of the disc.

12X, 8X DVD-R Writing Speed

- TY 8X DVD-R @ 12X

- Maxell 8X DVD-R @ 8X

- MKM 8X DVD-R @ 8X

- Optodisc 8X DVD-R @ 8X

- Ridisc 8X DVD-R @ 8X

- Traxdata 8X DVD-R @ 8X

- Summary

The 12X burned TY media did not report good results with either Plextools or CDSpeed. Using 8X DVD-R media, the writing quality is improved over that of 16X media, with the majority of burned media scans reporting good results. Best burn came with MKM DVD-R 8X media.