Turn off the Ad Banner  

To print: Select File and then Print from your browser's menu.

    -----------------------------------------------
This story was printed from CdrInfo.com,
located at http://www.cdrinfo.com.
-----------------------------------------------

Appeared on: Thursday, May 2, 2013
Scythe Introduces the Kama Panel 3.1

Scythe updated its Kama Panel series with the release of the Kama Panel 3.1, which offers an easy way to extend the PC chassis with additional connectivity such as two USB 3.0 ports and a HDD Rack for 2,5 inch Hard Drives (HDD) as well as Solid State Drives (SSD).

Features such as a built-in fan controller for two fans, a card reader and front audio connectors have been kept from the earlier models and remained throughout the revisions.

Kama Panel 3.1 is based on the design of the former versions and it is featuring two USB 3.0 ports and a card reader for Memory Stick Micro (M2), microSD / microSDHC and SD / SDHC / MMC flash media. Additionally one mic and one 3,5 mm stereo jack are located in the front of Kama Panel 3.1.



The right side of Kama Panel 3.1 is dedicated to control and monitor of fan speed and temperatures. Users are able to connect up to two case fans on the rear side and control them by turning the retractable knobs. Supplied connector cables support both 3-pin and 4-pin fan connectors, where the fan speed is only adjusted using voltage regulation. Kama Panel 3.1 is adjusting the voltage in the range between 3,7 and 12 volts. Built-in LCD provides information about current fan speed and temperature of both channels at the same time. Depending on the preference, users can use the backlight illumination or deactivate it, if required. In accordance with the measured temperatures, users are able to set individual alarm temperatures between 40 and 90°C in 1 degree steps. Displayed temperatures can be easily changed from Celsius to Fahrenheit by pressing one button in the front of Kama Panel 3.1.

One of the new key features of the new Kama Panel 3.1 is the built-in rack for 2,5 inch (6,35 cm) Hard Drives (HDD) and Solid State Drive (SSD). Thanks to this new rack, users are able to directly connect a drive with a maximum height of 9,5 mm. Kama Panel 3.1 is furthermore equipped with one power and one reset button on the left side.

The new Scythe Kama Panel 3.1 (model number SCKMPN-3100) is available today at a MSRP of 32,00 EUR (excluding TAX and VAT).


Home | News | All News | Reviews | Articles | Guides | Download | Expert Area | Forum | Site Info
Site best viewed at 1024x768+ - CDRINFO.COM 1998-2024 - All rights reserved -
Privacy policy - Contact Us .