Intel announced today its next-generation data center solid-state drive (SSD), the Intel Solid-State Drive DC S3700 Series, based on a very promising architecture and designed to remove storage bottlenecks.
With the new Intel controller, the company is completely abandons the architecture of the old X25-M/320/710 SSDs and adopts an all new design with a goal to deliver consistent IO latency.
According to its official specs, the Intel SSD DC S3700 feeds I/O-starved applications with 4KB random read performance of up to 75,000 IOPS and 4KB write performance of up to 36,000 IOPS. It has also typical sequential write latency of 65 microseconds and high Quality of Service (QOS) of less than 500 microseconds 99.9 percent of the time.
For IT/data center professionals who must also worry about data protection and maximum security, the Intel SSD DC S3700 Series offers full end-to-end data protection and 256-bit Advanced Encryption Standard (AES) capability. To further improve reliability, the Intel SSD DC S3700 incorporates an array of surplus flash memory used for data redundancy to minimize potential data loss.
The drive incorporates Intel High Endurance Technology (HET) to deliver single-level cell endurance in more cost-effective multi-level cell (MLC) technology. By combining SSD NAND management techniques with NAND silicon enhancements, HET enables the Intel SSD DC S37000 Series to achieve 10 full drive writes per day over the 5-year life of the drive. This is the equivalent of recording more than 186 years of HD video over the life of the highest capacity 800GB drive.
In addition, SSDs also improve overall power consumption. The Intel SSD DC 3700 Series reduces typical active power consumption to 6 watts and idle 650 milliwatts.
The Intel SSD DC S3700 Series is a 6 gigabit-per-second (Gbps) SATA drive with performance transfer rates of 500 megabyte per second (MB/s) reads and 460 MB/s writes. It delivers up to 2x read and 15x write performance over its previous generation Intel SSD 710 Series.
Intel is currently sampling the new SSD to its data center customers to begin quality and validation cycles. General production availability is expected to begin by the end of the year, with volume production in the first quarter of 2013.
The product comes in a 2.5-inch form factor for all capacities, 100, 200, 400 and 800 gigabytes (GB), and in a 1.8-inch form factor in 200GB and 400GB capacities. The recommended channel pricing (MSRP) for the 2.5-inch Intel SSD DC S3700 Series is as follows: $235 for 100 (GB) capacity; $470 for 200GB; $940 for 400GB and $1,880 for 800GB based on 1,000-unit quantities. The 1.8-inch drive MSRP pricing is $495 for the 200GB capacity and $965 for 400GB. Prices include a 5-year limited warranty.