Before we begin, you need to know that all the files that you are going to transfer onto the PS2 Memory Card, must be in capitals ( e.g. TITLE.DB ).
Part1: Connect the PS2 with the PC via FTP
First off all, connect the PS2 to the PC using the crossover cable and then run execftp69 on the PS2. You can run it either with HDLoader or with SwapMagic. If you are going to use HDLoader, then just use WinHIIP to transfer the .ISO image, or burn it into a CD and run it with Swap Magic 3.
When you run execftp on the PS2, you should see something like this:
Now, on the PC, go to: Start -> My Network Places -> View network connections, right click on Local Area Connection -> Properties and click on Internet Protocol (TCP/IP) (do not uncheck it…) then click on properties. Select “Use the following IP”. If you already have an ip address, subnet mask and default gateway, write these down somewhere and re-install them once this procedure is over. Now type:
IP address : 192.168.0.1
Subnet mask: 255.255.255.0
Leave the other settings as they are.
Now run the flashxp program, press F8 from your keyboard to reveal the “quick connect
” menu. Go to “Toggle
” and uncheck the “use passive mode
”. Now go to “General
” and in “Server or Url
” write 192.168.0.10
, then click on OK
and hopefully the connection with the PS2 should be established!!!