CDRInfo Forum CDRInfo Forum

Forums  Register  Login  My Profile  Inbox  Address Book  My Subscription  My Forums 

Photo Gallery  Member List  Search  Calendars  FAQ  Ticket List  Log Out

Phillips cdd3610 flash tool problem   Logged in as: Guest
Viewers: 709 You can click here to see Today's Posts | Most Active Topics | Posts Since Last Visit
  Printable Version
All Forums >> [Optical Storage Software] >> CD/DVD Authoring >> Phillips cdd3610 flash tool problem Page: [1]
Login
Message << Older Topic   Newer Topic >>
Phillips cdd3610 flash tool problem - 12/27/2003 9:46:26 AM   
zedster2112

 

Posts: 3
Joined: 12/27/2003
From: USA
Status: offline
I downloaded the latest ASPI download and then downloaded The latest flash tool for my Phillips cdd3610 and when I try to run the flash tool I get "ASPI send error". I've tried the ASPI fix and also redownloaded flash tool, but I still get the same message. I am using win XP on my system. Any ideas??? Thanks
Post #: 1
RE: Phillips cdd3610 flash tool problem - 12/27/2003 12:57:39 PM   
Jimmys


Posts: 421
Joined: 7/3/2003
From: Greece
Status: offline
Hello
Are you sure tha the aspi is currently installed in your system?
Check it by using the aspichk.exe utility

(in reply to zedster2112)
Post #: 2
RE: Phillips cdd3610 flash tool problem - 12/27/2003 1:51:26 PM   
Laffin Assassin


Posts: 4648
Status: offline
Hi zedster2122 and Welcome to Our Forum !!!
As was said many times before ASPI 4.60 is more than sufficient for XP machines. Newer versions are just too problematic to mess with so I suggest you try My ASPI FIX which you can download at :-
http://www.cdrinfo.com/forum/topic.asp?TOPIC_ID=10805
And just follow the Instructions fully and then see if it makes any difference !!!


_____________________________

Speaking Without Thinking, Is Like Shooting Without Aiming !!!

(in reply to zedster2112)
Post #: 3
RE: Phillips cdd3610 flash tool problem - 12/29/2003 3:59:27 AM   
zedster2112

 

Posts: 3
Joined: 12/27/2003
From: USA
Status: offline
I used aspifix. Then I ran ASPI check and it has all files of 4.60 installed. When I try to use the flash tool again I still get a ASPI send error. Any other ideas???? Im using the correct flash tool for the CDD3610. Zedster

(in reply to zedster2112)
Post #: 4
RE: Phillips cdd3610 flash tool problem - 12/29/2003 4:52:31 AM   
Laffin Assassin


Posts: 4648
Status: offline
This drive is older than me so if you are still getting the same problem I would have thought that it is a hardware failure so it may be time to replace with a new one seeing though the new fast ones are very cheap at the moment !!!


_____________________________

Speaking Without Thinking, Is Like Shooting Without Aiming !!!

(in reply to zedster2112)
Post #: 5
RE: Phillips cdd3610 flash tool problem - 12/29/2003 6:49:05 AM   
zedster2112

 

Posts: 3
Joined: 12/27/2003
From: USA
Status: offline

Yeah it's an old one all right...I'll check Ebay and get a new one. Thanks.
quote:
Originally posted by Laffin Assassin

This drive is older than me so if you are still getting the same problem I would have thought that it is a hardware failure so it may be time to replace with a new one seeing though the new fast ones are very cheap at the moment !!!


(in reply to zedster2112)
Post #: 6
RE: Phillips cdd3610 flash tool problem - 12/29/2003 2:15:48 PM   
Laffin Assassin


Posts: 4648
Status: offline
OK No problem !!!
I hope you manage to find one on E-Bay but personally I would purchase one from a dealer with a good reputation or from one of the On-Line Shops that way you do get a warrenty !!!


_____________________________

Speaking Without Thinking, Is Like Shooting Without Aiming !!!

(in reply to zedster2112)
Post #: 7
RE: Phillips cdd3610 flash tool problem - 12/29/2003 7:14:58 PM   
Matthew

 

Posts: 943
Joined: 1/2/2002
From: United Kingdom
Status: offline
According to this site, the flash should be performed from DOS
http://www.geocities.com/SiliconValley/Bay/6893/3610mod.htm

Reading further, there is a DOS and a Windows tool - now if I had a choice of a DOS or a Windows Flash, I'd go for DOS every time!

Try again using DOS mode and the 3.09 firmware

This is a pretty old drive though - if you end up looking for a new one (I think your location said USA) - keep a close eye out for good rebate and discount offers, or go looking for a cheap drive that uses the Liteon guts at lower price than a branded Liteon - does anyone OTHER than Liteon use that rounded end LED and rounded end button (the two are the same shape) - if a drive has those faceplate features, it's probably Liteon based - typically, the tray front is also rectangular, slightly vertically bowed but faired off a little at the ends.

(in reply to zedster2112)
Post #: 8
RE: Phillips cdd3610 flash tool problem - 12/29/2003 10:19:49 PM   
Matthew

 

Posts: 943
Joined: 1/2/2002
From: United Kingdom
Status: offline
Just spotted:
http://www.circuitcity.com/detail.jsp?c=1&b=g&catoid=-10262&qp=0&bookmark=bookmark_7&oid=82894
Liteon 411s (DVD +/-RW and a respectable CD-R speed too!)
For $69.99 with rebate at Circuit City

Now THAT is what you call a rebate offer!

(in reply to zedster2112)
Post #: 9
Page:   [1]
All Forums >> [Optical Storage Software] >> CD/DVD Authoring >> Phillips cdd3610 flash tool problem Page: [1]
Jump to:





New Messages No New Messages
Hot Topic w/ New Messages Hot Topic w/o New Messages
Locked w/ New Messages Locked w/o New Messages
 Post New Thread
 Reply to Message
 Post New Poll
 Submit Vote
 Delete My Own Post
 Delete My Own Thread
 Rate Posts




Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI

0.031