CDRInfo Forum CDRInfo Forum

Forums  Register  Login  My Profile  Inbox  Address Book  My Subscription  My Forums 

Photo Gallery  Member List  Search  Calendars  FAQ  Ticket List  Log Out

DVR-109XLB   Logged in as: Guest
Viewers: 1164 You can click here to see Today's Posts | Most Active Topics | Posts Since Last Visit
  Printable Version
All Forums >> [Optical Storage Software] >> DVDInfoPro >> DVR-109XLB Page: [1]
Login
Message << Older Topic   Newer Topic >>
DVR-109XLB - 4/20/2005 6:42:54 AM   
Kingprawn

 

Posts: 6
Joined: 10/22/2004
Status: offline
Hello

Am I correct in assuming that the pio dvr-109XLB fw: 1.40 does not support pi/po scanning in the lastest version of dvdinfopro ?

The reason I ask is I have tried with many different dvd+r disc and the test starts and then stops after a few seconds. The crc error check test also shows up tons of errors but when I check the same disc using nero info tools they come back as normal (surface + file scan)?

So is it a software problem ?

Thanks
Simon
Post #: 1
RE: DVR-109XLB - 4/20/2005 6:56:14 AM   
zebra


Posts: 225
Joined: 6/20/2004
From: .:Australia:.
Status: offline
Very interesting indeed! We will need to look into this right away!


_____________________________

Glory may be fleeting, but obscurity is forever

My home - Speedlabs.org

The Zebra BLOG!

(in reply to Kingprawn)
Post #: 2
RE: DVR-109XLB - 4/20/2005 7:01:19 AM   
zebra


Posts: 225
Joined: 6/20/2004
From: .:Australia:.
Status: offline
Ok.

From reading, it seems that you are attempting to compare a CRC error scan made in Nero, to a PI/PO scan, made in your Pioneer drive, using infoPro. Am I reading this right? If this is the case, I can assure you - the two resultants do not correlate. They are totally different measurments. They cannot be compared.

OR, are you attempting to compare DVDInfoPro CRC scan with Nero CRC scan?


_____________________________

Glory may be fleeting, but obscurity is forever

My home - Speedlabs.org

The Zebra BLOG!

(in reply to zebra)
Post #: 3
RE: DVR-109XLB - 4/20/2005 7:18:23 AM   
Kingprawn

 

Posts: 6
Joined: 10/22/2004
Status: offline
Hello

I first tried to do a pi/po scan using the dvr-109 and that failed after a few seconds (with verbatum 8x and verbatum 16x media).

Then I did a crc error check using dvdinfo and it found quite a few errors on the discs. So I used the same discs to do a file & surface scan (ScanDisk) using Nero cd/dvd speed but it didn't find any problems (which is possible as it might be a different type of test).

Thanks
Simon

(in reply to Kingprawn)
Post #: 4
RE: DVR-109XLB - 4/20/2005 8:03:05 PM   
zebra


Posts: 225
Joined: 6/20/2004
From: .:Australia:.
Status: offline
Yes! Indeed, they ARE different tests.

The fact that DVDInfoPro has found many errors in CRC scan is a logical reason why PI/PO scanning is also failing. I suggest you try with another disc, and report back to me. :-D


_____________________________

Glory may be fleeting, but obscurity is forever

My home - Speedlabs.org

The Zebra BLOG!

(in reply to Kingprawn)
Post #: 5
RE: DVR-109XLB - 4/21/2005 4:48:44 PM   
Kingprawn

 

Posts: 6
Joined: 10/22/2004
Status: offline
I have tried many different type of disc and everytime the test start and just goes back to "ready" after about 2 seconds.
Here is a bit of the dvdinfo log

21:53:06 Start TestMediaPresent()
21:53:06 End TestMediaPresent()
21:53:06 Waiting for unit to become ready
21:53:06 Start WaitUnitReady
21:53:06 Ready
21:53:06 Starting PI PO Test...
21:53:06 Start THREAD PIPOPioneereThread()
21:53:06 Pre-Spin up...
21:53:06 PI/PO Test Running
21:53:07 Ready

Thanks
Simon

(in reply to zebra)
Post #: 6
Page:   [1]
All Forums >> [Optical Storage Software] >> DVDInfoPro >> DVR-109XLB Page: [1]
Jump to:





New Messages No New Messages
Hot Topic w/ New Messages Hot Topic w/o New Messages
Locked w/ New Messages Locked w/o New Messages
 Post New Thread
 Reply to Message
 Post New Poll
 Submit Vote
 Delete My Own Post
 Delete My Own Thread
 Rate Posts




Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI

0.061