CDRInfo Forum CDRInfo Forum

Forums  Register  Login  My Profile  Inbox  Address Book  My Subscription  My Forums 

Photo Gallery  Member List  Search  Calendars  FAQ  Ticket List  Log Out

Normal CD datatype (DAO or SAO) ?   Logged in as: Guest
Viewers: 1230 You can click here to see Today's Posts | Most Active Topics | Posts Since Last Visit
  Printable Version
All Forums >> [Optical Storage Software] >> CD/DVD Copy >> Normal CD datatype (DAO or SAO) ? Page: [1]
Login
Message << Older Topic   Newer Topic >>
Normal CD datatype (DAO or SAO) ? - 6/27/2003 5:47:21 PM   
webbertrix

 

Posts: 4
Joined: 6/27/2003
From:
Status: offline
Hello,

As far i understand over Alcohol 120% :

(The Disc At Once method always allow the writing of RAW 2353 byte sectors with some subcode channels variations) :


1) RAW (DAO) : where the 96 bytes of associated P-W subcode channels are ALWAYS generated by the HARDWARE recorder.

2) RAW DAO-16 : where the 16 bytes of associated P-Q subcode channels are generated by SOFTWARE (but R-S-T-U-V-W by HARDWARE).

3)*RAW DAO-96 : where the 96 bytes of associated P-W subcode channels are ALWAYS generated by SOFTWARE.


*N.B : Best CD-R DAO write mode is #3 since :

(It allows writing of all subchannel information, including Digital Signatures, CD-Text, ISRC, Catalog Numbers, CD+G, CD+Midi, Gaps, Indices, TOC, etc.)


I beleive the setting in Alcohol "Write Method" = DAO/SAO is using DAO write mode #1.

But i dont understand what's SAO has to do into this..


Finally,

DAO always write in RAW but have some subchannel variations.
(SAO is another story.)


Someone could tell me which write method between DAO or SAO is actually used when burning a CD in "Normal CD" datatype.


My burner have some big problems reading back DAO RAW-96.
But, my burner could read back the CD'R if it was previously burned over DAO/SAO

I would like to confirm it could read back DAO (RAW). (And not SAO)


Thanks.
Post #: 1
RE: Normal CD datatype (DAO or SAO) ? - 6/27/2003 10:28:51 PM   
sp


Posts: 1371
Joined: 3/30/2003
From: Falkland Islands
Status: offline
DAO is SAO with a closed disc. (One bit in the session lead-in is diferend, I think.)
It is based on cue and bin files. It was introduced by Yamaha, long ago, and is still in wide use by the majority of applications for non-copy-protected CD's.

RAW depends on the interpretation of the writer to a some extend.
The resulting recording can be SAO or DAO. But here this is not done using cue and bin files, but by supplying the "RAW" 2460 bytes per sector by the recording application.

Hence SAO/DAO and RAW are to some extend contradictory. When using RAW recording, the terms SAO and DAO are used just to indicate that TAO is not used, And this is because track linking can not be done in the pre-burnProof area in RAW mode.

Some recorders put restrictions on how much actually bytes they can accept. This is due to the fact that some bits among these bytes are used for head positioning during reading. Changing these, the disc would be unreadable by most players.

Software marketing and the authors themselves have made the used terminology quite complicated.

When your reader does a slow reading, this means there are errors in some parts of the disc, due to copy-protection. This is normal.

For day-to-day recording use DAO, or SAO for making multisession discs.


_____________________________

WM # CI

(in reply to webbertrix)
Post #: 2
RE: Normal CD datatype (DAO or SAO) ? - 6/30/2003 4:45:53 PM   
webbertrix

 

Posts: 4
Joined: 6/27/2003
From:
Status: offline
Thank you for your concern.

But my problem is i can't read back CDR that was made by the *exact*
same burner in RAW DAO-SUB or RAW SAO-SUB.

(I'm using the GCC-4480B with firmware 1.02)

Weirdly, theses CDR works marvously well on other readers/burners!!
So i could just burn cdr's and give them away for peoples other than me [xx(]


Nero Infotool Writing method detected for GCC-4480B :
=====================================================

Write Modes 0: Packet,
1: TAO,
2: SAO (also know as SAO cooked),

*RAW SAO,
*RAW SAO 16,
*RAW SAO 96.

(*RAW SAO in this case is not the same as
Session At Once and therefore it is not
an MMC standard!)

3: DAO (also know as RAW DAO),
RAW DAO 16,
RAW DAO 96


This drive should support RAW reading easily !!@!#$

Also, in the same LG combo series;

The GCC-4120B, GCC-4320B works fine.
I previously had both of them... No issues like that.

Any idea how i could fix this ? I already sent e-mails to LG tech
support and they aren't aware of any issues...

(in reply to webbertrix)
Post #: 3
RE: Normal CD datatype (DAO or SAO) ? - 6/30/2003 8:12:52 PM   
Dolphinius_Rex


Posts: 3310
Joined: 9/14/2002
From: Vancouver, B.C. Canada
Status: offline
This is a known issue about the drive, and LG has been informed. Actually, the first people to find out about this problem were the nice people of Alcohol-soft.com (well, at least the first people to *talk* about it). You can read about the problem in their support forums: http://forum.alcohol-software.com/index.php?act=ST&f=1&t=4511&hl=4480b&s=8836168cd722a112d1340e595b04fdc9

hopefully they will bring out a firmware fix soon! [:I]


_____________________________

Canada; Leading the world in being just north of the U.S.A.

(in reply to webbertrix)
Post #: 4
RE: Normal CD datatype (DAO or SAO) ? - 7/1/2003 2:08:25 AM   
webbertrix

 

Posts: 4
Joined: 6/27/2003
From:
Status: offline
Yes, i knew about it.. I'm just looking for the freaking fix!

Well, if you check this thread, eviled and me were the first ones
to talk about that issue :)

http://club.cdfreaks.com/showthread.php?s=&threadid=70842&highlight=4480b

I made LG aware & Alcohol ppl around the same time.
(Since i was using Alcohol soft for my testings, and LG were thinking it may be a software or pc configuration issue)

Thanks.

(in reply to webbertrix)
Post #: 5
Page:   [1]
All Forums >> [Optical Storage Software] >> CD/DVD Copy >> Normal CD datatype (DAO or SAO) ? Page: [1]
Jump to:





New Messages No New Messages
Hot Topic w/ New Messages Hot Topic w/o New Messages
Locked w/ New Messages Locked w/o New Messages
 Post New Thread
 Reply to Message
 Post New Poll
 Submit Vote
 Delete My Own Post
 Delete My Own Thread
 Rate Posts




Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI

0.047