Which CD-Rs for my Thermal One-Ink Disc Printer? (Full Version)

All Forums >> [Optical Storage] >> BD, CD, DVD Media



Message

digdashdug -> Which CD-Rs for my Thermal One-Ink Disc Printer? (8/2/2006 8:43:20 PM)

Hello,

I just purchased a TEAC P11/KIT Thermal One-Ink Disc Printer.  I looked at the other comparable lower-end Thermal Disc Printers on the market too.  I read some very questionable reviews of both the Casio and the Primera models, so I decided to try this one which I was unable to find any user reviews for.  If anyone has experience with this device, feedback would be appreciated.

But my question is this...  I have found Standard Silver/Silver CD-R's and I've also found Thermal Silver/Silver CD-R's.  The "thermal" versions are about $0.03 - $0.04 more per disc than the "standard" discs.  From what I can understand, it's only the full-color (and much more expensive) thermal printers that need the special "thermal" top discs.  I was just wondering if anyone could confirm that the standard (prodisc for example) Silver/Silver CD-R's will work well with my one-ink thermal printer?


Hope that makes at least some sense!  Thanks for your time...



alexmacris -> RE: Which CD-Rs for my Thermal One-Ink Disc Printer? (8/3/2006 3:52:14 PM)

hi friend! Just one question, which discs TEAC reccomends for your printer? Have you asked them?



digdashdug -> RE: Which CD-Rs for my Thermal One-Ink Disc Printer? (8/4/2006 12:11:49 AM)

No, good idea...  I'll start there.

Based on some online readings, I think I've narrowed it down to "Prodisc" (silver top / diamond bottom) CD-R's.  Just not sure whether I should go with the standard - shiny top, or the "clear-coat top" (aka matte finish).  I have ordered samples of both, so I will try them out and go from there.

thanks.



alexmacris -> RE: Which CD-Rs for my Thermal One-Ink Disc Printer? (8/5/2006 4:38:50 PM)

Hi friend! I cannot help much at this subject, lets us know about your findings



Page: [1]

Valid CSS!




Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI
0