Saturday, December 20, 2014
Search
  
Most Popular
Hardware Reviews
PC Parts
Samsung 850 Pro SSD review
Toshiba SSHD 1TB review
Micron M600 128GB SSD review
Lexar Professional Workflow DD512 512GB Review
Shuttle SH81R4 mini PC review
WEB Reviews
Seagate Enterprise Capacity 3.5 V.3 4TB SAS 6Gb/s HDD Review
OCZ Vector 256GB SSD Review @ Custom PC Review
Gigabyte F2A85XM-D3H
NZXT Phantom 630
Auvio Bluetooth Portable Speaker Review
Corsair H90 CPU Cooler Review
BIOSTAR Hi-Fi Z77X (Intel Z77) Motherboard Review
Noctua NH-L9i Cooler Review on Technic3D
Breaking News
Kodak Returns To CES With Consumer Product Line
North Korea Suggests Joint Inverstigation With U.S. Over Sony Hacking
T-Mobile to Pay $90 Million To Settle Case With FCC
New Trojan Targetted Banks Wordlwide
FBI Confirms North Korea Was Behind Sony Hack
Apple Responds To BBC's Allegations Over Working Conditions In Chinese Factory
BlackBerry Returns To Cash Flow
Comparison: Quantum Dot Vs. OLED Displays
Home > Hardware Reviews > PC Parts

Monday, September 06, 2010
Shuttle SH55J2 review

4. Installing the components

So what we need to have the system up and running? Probably just three components, a cpu, memory and a hard disk drive. For our tests, we used an Intel Core i3-530 processor and 2x2GB DDR3 memory by G-Skill:

The CPU should be handled with care and carefully put in place. There is only one direction you can install the CPU so you cannot make any mistake here:

Apply some thermal paste (included) and secure the Shuttle CPU cooler. It is advised to follow the X rule here to have the best results, meaning screwing diagonally:

Installing the memory modules is also easy since they are properly colored:

Before getting into the storage area, you need to arrange the SATA cables in order to easily reach the devices:

Installing a HDD and an optical device should be also very easy. The case is offering enough and properly placed holes for the installation screws you may need. The next step is to plug the SATA and power cables to the installed devices:

There is a lot of free space left between the SATA and ODD drives:

Here is a top view of the device:

As you can see in the picture below the SATA cables are already fastened on the case with plastic bands so you may find it hard to make them reach the installed SATA device. So you may need to cut the plastic band and possibly fasten the SATA cables on the case again in a more convenient position:

Finally our system is ready to use:




Get RSS feed Easy Print E-Mail this Message


 
Home | News | All News | Reviews | Articles | Guides | Download | Expert Area | Forum | Site Info
Site best viewed at 1024x768+ - CDRINFO.COM 1998-2014 - All rights reserved -
Privacy policy - Contact Us .