Thursday, November 26, 2015
Most Popular
Hardware Reviews
PC Parts
Samsung 950 Pro M.2 512GB NVMe review
OCZ Vector 180 480GB SSD review
Crucial BX200 960GB SSD review
WEB Reviews
Seagate Enterprise Capacity 3.5 V.3 4TB SAS 6Gb/s HDD Review
OCZ Vector 256GB SSD Review @ Custom PC Review
Gigabyte F2A85XM-D3H
NZXT Phantom 630
Auvio Bluetooth Portable Speaker Review
Corsair H90 CPU Cooler Review
BIOSTAR Hi-Fi Z77X (Intel Z77) Motherboard Review
Noctua NH-L9i Cooler Review on Technic3D
Breaking News
German ISPs May Block Music-sharing Sites: court
Study Says HTTPS Certificate and SSH Key Reuse Endangers Millions of Devices Worldwide
SK Hynix Rejects Chinese Take-over Offer
New Huawei Mate 8 Smartphone Launched With Kirin 950 Inside
Samsung's New DDR4 with TSV Gives a Boost To Data Centers and Servers
New Raspberry Pi Zero Is A $5 Tiny Computer
Panasonic's CX Ultra HD Smart TVs Bring 4K Closer To Home
New LG Ray Smartphone Focuses On Photo Shooting
Home > Hardware Reviews > PC Parts

Tuesday, May 22, 2007
Corsair PC2-6400C4

2. Test Setup

In order to test the memory modules, we used the following setup:

  • CPU: Intel XE6600 @ 2.4GHz
  • Motherboard: eVGA 680i LT
  • PSU: OCZ GameXStream GXS600 SLI-Ready
  • VGA: MSI 7600GT Silent (stock memory/core timings)
  • HDD: WD 800JB
  • OS: Windows XP SP2 with all the latest updates installed

While for benchmarking we used:

  • Memtest86+ v1.70
  • Sisoft Sandra 2007 SP1
  • RightMark Memory Analyzer v3.70
  • ScienceMark 2.0 Memory Benchmark
  • Pov-Ray v3.70 Beta15
  • SuperPI XS Mod v1.50

The eVGA 680i LT motherboard offers many possibilities for overclock both memory and CPU, either synced or not. For most of our tests, we set the memory and CPU un-synced and tried to find the best possible, lowest memory timings. Each benchmark had to pass a 30min burn-in test with Memtest86+ v1.70 (DOS), without any producing any errors at all. Furthermore, we tried the Pov-Ray benchmark and Orthos Stability test under Windows to ensure that our system was rock solid. All benchmarks were then run twice and all displayed results are the average of both results.

The SPD, as reported by Everest Ultimate Edition, is only set for 400MHz with 4-4-4-12-2T timings:

In case you are using an EPP Enabled motherboard, those timings will be automatically set by the motherboard.

Lastly, here is the table of FSB and voltages. The product not only performs according to the specs, but with even tighter timings than 4-4-4-12, with of course a higher voltage (2.20). The product is rated at 400MHz, but managed to produce an additional 163MHz, superb performance!

At DDR2 1126MHz, our CPU FSB and RAM were synced (1:1) and we overclocked the CPU up to 2.533GHz

Below are the memory timings as reported by CPU-Z:

Get RSS feed Easy Print E-Mail this Message

Home | News | All News | Reviews | Articles | Guides | Download | Expert Area | Forum | Site Info
Site best viewed at 1024x768+ - CDRINFO.COM 1998-2015 - All rights reserved -
Privacy policy - Contact Us .