Turn off the Ad Banner  

To print: Select File and then Print from your browser's menu.

    -----------------------------------------------
This story was printed from CdrInfo.com,
located at http://www.cdrinfo.com.
-----------------------------------------------


Appeared on: Tuesday, November 11, 2003
Nero DVD-Video Guide


1. Introduction

“Nero Burning Rom DVD-Video”

INTRODUCTION

This is a simple guide for creating a DVD-Video project using the most known Nero Burning Rom software. There are several ways of creating our project but we will try the simplest.

The software's version we used was 6.0.0.19


2. Step1

“Nero Burning Rom DVD-Video”

Open

We run the Nero Burning Rom from Nero software. The program opens and as soon as we informed about the version we will see the following screenshot:

Now we must choose from the drop-down menu, in the up and left corner of Nero screen, the DVD option. Next we select the DVD-Video icon and before we press the NEW button,on the up and right, we can give a name to our Compilation from the tab Label ( if we forget it there is no problem because we will have the oportunity again later). We write the name we want to give in the ISO 9660 space, overwriting the word NEW. Now we press the NEW button.

This is the screen that we will see:


3. Step2

“Nero Burning Rom DVD-Video”

Disk info

Before we start the drug and drop procedure for creating our DVD i will tell you a few thing that you maybe want to know. First of all you can check the media that you want to burn if it is blank or not and thus some information about it.

First insert your media. From the main bar we choose the Recorder option

On the left is the menu that will appear.

As you can see there is a Disk Info option. Press it and see the next screenshot which is all the information for the media that you have inserted.

(or just press the icon).

 

 

 

 

Just press OK to close the window.


4. Step3

“Nero Burning Rom DVD-Video”

Choose Recorder

This is an option for those who have more than one recorder in their computer. You can select the recording drive you want to use each time. There is the possibility that Nero recognizes by default your CD recorder and you want to use your DVD recorder. So we open the Recorder from the main bar and as it is obvious we choose the "Choose Recorder "option(otherwise you can press the icon).

Here is the screen that you will see. In my Pc i had only one recorder so i don't need this option. But if you have more than one you should select which you wish to use by pressing on it. After press the OK button.


5. Step4

“Nero Burning Rom DVD-Video”

Erase RW Disk

If you are using a rewritable disk and you want to erase it open once the Recorder option from the main bar and choose "Erase Rewritable Disk" from the drop-down menu as bellow.

The following box will apear. We select the recorder where is inserted the RW media which we are about to erase. As far as it concerns the erasing method we can select either "Quick-erase" or "Full-erase". The basic difference is that in the first we make the media ready for rewriting and in the second we erase comletely the contents of the disk. I usually prefer quick than full because is very faster. After press the Erase button and wait for the procedure to be finished. Ending we close the window.


6. Step5

“Nero Burning Rom DVD-Video”

Burn

We find and we choose in the File Browser the folder with the files we want to write. In the right menu we see the contents of the selected folder. We choose them all ( put the censor in the contents menu and press ctrl+A) and with the drug and drop way we put them in the VIDEO_TS in the second from the left menu, as in photo bellow.

After you finish drug and drop choose the Recorder Option from the main bar and right after the "Burn Compilation..." option( or just press the icon).

Below is the screen you will see. Choose the "Write" option for writing your project or "Simulation" for test. Also set the speed you want, from the "Write speed" drop-down menu. If we forget to name our compilation this is our last chance to do it, just as we described in page 1. Ending press the Burn botton to start the burning procedure(or Simulate button if you have choose Simulation).

Now you'll have to wait. The recording time depends on the writing speed that your drive and media supports.

As soon as the procedure is complete you will you will receive the following message.



Home | News | All News | Reviews | Articles | Guides | Download | Expert Area | Forum | Site Info
Site best viewed at 1024x768+ - CDRINFO.COM 1998-2024 - All rights reserved -
Privacy policy - Contact Us .