To print: Select File and then Print from your browser's menu.

    -----------------------------------------------

     This story was printed from CdrInfo.com,

     located at http://www.cdrinfo.com.

    -----------------------------------------------

"..On the rear panel, there is a row of 8 jumpers were you can select the SCSI ID of the drive, terminator, ... the normal stuff. But, if you put a jumper on the pin 6 (0 - based), the 56s or 58s will turn into a 55s, and thus the drive will be 100% compatible with BR images (will NOT correct data as they are written).

This tweak is provided "as is", use it AT YOUR OWN RISK. At this time, we've had 3 reports that it worked, and we've personnally tested it on a 58s, and found it OK. It does even write at x8 when you select MAX SPEED on CDRWIN 3.8a (nevertheless the 55 bios is supposedly limited to x4 writing.

I know a lot of people now will try it on SCSI drives of other brands. OK, it eventually can work on recent drives to reactivate older bioses, but please be carefull and don't ruin your writer with illegal jumpers configuration.."