Turn off the Ad Banner  

To print: Select File and then Print from your browser's menu.

    -----------------------------------------------
This story was printed from CdrInfo.com,
located at http://www.cdrinfo.com.
-----------------------------------------------

Appeared on: Thursday, June 30, 2011
Fujitsu Launches New SPI FRAMs

Fujitsu Semiconductor Europe is sampling the new SPI FRAMs based on its 0.18µm technology.

With this step, Fujitsu approaches the end of the migration process from 0.35 to 0.18µm technology achieving the FRAM performance with E2PROM compatible package.

FRAM (Ferroelectric Random Access Memory) combines the advantages of fast writing SRAM with non-volatile Flash into one device. The new SPI FRAM family MB85RSxxx incorporates 3 devices: MB85RS256A, MB85RS128A and MB85RS64A, which represent 3 density levels of 256Kbit, 128Kbit and 64Kbit respectively. All devices operate at a voltage range between 3.0 and 3.6V and provide an endurance of 10 billion write/read cycles as well as data retention of 10 years at 55C. Operating frequency has been significantly increased to a maximum of 25MHz, and since FRAM products render voltage boosters unnecessary for the writing process, they are well-suited for low power applications. The products are offered in 8-pin plastic SOP packages with standard memory pin assignment, which are fully compatible with E2PROM devices.

FRAM standalone memory devices are widely used in metering, factory automation applications as well as various industrial segments, where data logging, high speed write access and high endurance is essential. FRAM can ideally replace all battery back-up solutions.


Home | News | All News | Reviews | Articles | Guides | Download | Expert Area | Forum | Site Info
Site best viewed at 1024x768+ - CDRINFO.COM 1998-2014 - All rights reserved -
Privacy policy - Contact Us .