Not much have changed to the new list compared to its previous version. There is only new entry was at number 10—a 3.14 petaflop/s Cray XC30 installed at an undisclosed U.S. government site.

Although the United States remains the top country in terms of overall systems with 233, this is down from 265 on the November 2013 list. The number of Chinese systems on the list rose from 63 to 76, giving the Asian nation nearly as many supercomputers as the UK, with 30; France, with 27; and Germany, with 23; combined. Japan also increased its showing, up to 30 from 28 on the previous list.

Since its inception in June 1993, the TOP500 list has served as a consistent measure of the performance growth of supercomputers, since all systems are ranked according to performance running the same Linpack benchmark application. For the second consecutive list, the overall growth rate of all the systems is at a historical low.

This lag in the overall average performance of all 500 systems is noticeably influenced by the very large systems at the top of the list. Recent installations of very large systems – up to June 2013 – have counteracted the reduced growth rate at the bottom of the list, but with few new systems at the top of the past few lists, the overall growth rate is now slowing. This offers an indication that the market for the very largest systems might currently behave differently from the market of mid-sized and smaller supercomputers.

This is supported by the fact that the performance of the last system on the list (No. 500) has consistently lagged behind historical growth trends for the past five years, a trajectory that now increases by only 55 percent each year.

On the latest edition of the list, the No. 500 system recorded a performance of 133.7 teraflops (trillions of calculations per second, 117.8 teraflop/s six months ago. The last system on the newest list was listed at position 384 in the previous TOP500. This represents the lowest turnover rate in the list in two decades.

Other highlights from the 43rd list

• - Total combined performance of all 500 systems has grown to 274 Pflop/s, compared to 250 Pflop/s six months ago and 223 Pflop/s one year ago. This increase in installed performance also exhibits a noticeable slowdown in growth compared to the previous long-term trend.
• There are 37 systems with performance greater than a petaflop/s on the list, up from 31 six months ago.
• The No. 1 system, Tianhe-2, and the No. 7 system, Stampede, use Intel Xeon Phi processors to speed up their computational rate. The No. 2 system, Titan, and the No. 6 system, Piz Daint, use NVIDIA GPUs to accelerate computation.
• A total of 62 systems on the list are using accelerator/co-processor technology, up from 53 from November 2013. Forty-four of these use NVIDIA chips, two use ATI Radeon, and there are now 17 systems with Intel MIC technology (Xeon Phi). The average number of accelerator cores for these 62 systems is 78,127 cores/system.
• Intel continues to provide the processors for the largest share (85.4 percent) of TOP500 systems. The share of IBM Power processors remains at 8 percent, while the AMD Opteron family is used in 6 percent of the systems, down from 9 percent on the previous list.
• Ninety-six percent of the systems use processors with six or more cores and 83 percent use eight or more cores.
• HP has the lead in systems and now has 182 systems (36 percent) compared to IBM with 176 systems (35 percent). HP had 196 systems (39 percent) six months ago, and IBM had 164 systems (33 percent) six months ago. In the system category, Cray remains third with 10 percent (51 systems).