Thursday, March 28, 2024
Search
  
Tuesday, May 6, 2014
 Shuttle Releases Fanless NAS with Built-in WiFi Hotspot
You are sending an email that contains the article
and a private message for your recipient(s).
Your Name:
Your e-mail: * Required!
Recipient (e-mail): *
Subject: *
Introductory Message:
HTML/Text
(Photo: Yes/No)
(At the moment, only Text is allowed...)
 
Message Text: Shuttle is now launching the KS10, a storage solution for NAS entry-level users.

This network-based one-bay storage solution is suitable for storing files (e.g. documents, music and photos) on the local network, for location-independent data backup or for setting up your own private cloud.

The device consumes less than 6 W in standby mode and 12 W during normal operation. It is suitable for 3.5" hard disks up to at least 4 Terabytes and has further USB ports for external storage devices and printer. Devices connected by USB cable as well as memory cards in the built-in SD card reader can be shared over the network. The Gigabit Ethernet network connection enables data transfer speeds of up to 80 MB/s when reading and up to 60 MB/s when writing. In addition, a built-in, access-protected WiFi hotspot can be enabled for communication with wireless devices.

The KS10 also offers simple server services for FTP, DLNA and iTunes. Also on board are functions such as Wake-On LAN, Ethernet and a scheduler for NAS operating time.

Hardware:

  • Chassis
    Robust black plastic chassis with large rubber feet
    Dimensions: 124 mm (H) x 60 mm (W) x 205 mm (L) = ca. 1.5 litres
    Weight: 550 g
    Kensington Security Slot at the back panel (also called a K-Slot or Kensington lock) as a part of an anti-theft system
  • Storage Bay, Hard disk support
    One storage bay (storage drive not included)
    Supports one 8.9 cm (3.5") hard disk drive up to 4 TB capacity (or more)
    Easy screw-free hard disk installation (no tools required).
    Supports hard disk spin-down timer
    Supports check/format disk, SMART information report, disk usage status report
    Hard disks must support SMART temperature feature with temperature sensor
  • Network connector / IP setting
    1x Gigabit LAN (RJ45, rear)
    Supports Wake-on-LAN (WOL) [4]
    Supports IEEE P802.3az Energy Efficient Ethernet (EEE)
    IP Configuration: Supports Static IP or Auto IP by DHCP server
    Supports Hostname/Groupname
  • Integrated WLAN AP
    Wireless LAN Access Point / Hotspot (can be enabled/disabled)
    IEEE 802.11 b/g/n (max. 54 Mbit/s)
    Encryption methods: WEP 64/128 bits, WPA, WPA2
    Frequency band: 2.4 GHz
    Bandwidth settings: 20 and 40 MHz
  • USB Connectors
    1x USB 2.0 (type A, front), supports Auto-Copy function
    1x USB 2.0 (type A, rear)
    Both USB ports support external devices like hard disks, flash drives, 
    printers, digital camera and USB hubs. 
    Memory can be shared to local network.
  • Card Reader
    Buillt-in card reader in the front panel
    Supports SD, SDHC and SDXC flash memory cards
    Supports Auto-Copy function
  • Buttons (rear)
    Main power button
    Reset button (hole) for admin passwort reset
  • LED Indicators
    KS10 comes with six LED indicators with the following behavior:
    1) System LED: dual colour (operating mode/error: blue/red)
    2) HDD LED: dual colour (access/error: blue/red)
    3) SD card reader LED: single colour (access: blue)
    4) USB LED: single colour (access/connect: blue)
    5) LAN speed LED (10/100 Mbps: green, 1000 Mbps: orange)
    6) LAN activity LED (access/link: blinking green)
  • CPU / RAM / OS
    Processor: Marvell 88F6707 800 MHz, ARMv7 compliant SOC
    DRAM memory size: 256 MB DDR3
    Flash memory size: 1 Gb
    Operating system: Embedded Linux
  • Power Adapter
    External 40W AC/DC power adapter (fanless), 19V / 2.1A
    AC Input: 100~240V AC, 50~60Hz
    Automatic voltage adjust
    Dimensions: 89.5 x 37 x 26.5 mm (LWH)
    DC Connector: 5.5/2.5mm (outer/inner diameter)
  • Fanless cooling system
    Low noise operating thanks to a fanless cooling design.
    Make sure the NAS device is in a well ventilated area.
    The System also shuts down when the hard disk temperature exceeds 65 °C / 149°F. [2]
  • Accessories
    Quick Installation Guide
    AC Power adapter (40 W) with AC power cord (plug depends on region)
    Ethernet cable, ca. 150 cm
    Driver CDROM with NAS finder software (Windows & Mac) and documentation

Functionality:

  • Web User Interface
    The device settings are made through a web browser on a computer, which is connected to the same local subnet. 12 languages are supported: English, German, French, Spanish, Italian, Dutch, Danish, Russian, Turkish, Chinese (simple+trad.) and Japanese. The OMNINAS Web Interface is particularly user friendly thanks to its simple structure. The OMNINAS Wizard is your guide during the initial setup.
  • Finder Software
    The OMNINAS Finder Software Tool is used to detect the OMNINAS system in the local network (within the same subnet). It can start the Web User Interface in your default browser and can map/unmap the internal and external storages of the OMNINAS to a drive letter of your PC.
  • APPs for mobile devices
    You can use an App to upload and share files from iOS and Android devices like iPhone, iPAD, Android phone and Android tablet.
    Just lock for the appropriate "OMNINAS" app on one of these websites:
    Android: https://play.google.com/store/apps/details?id=com.shuttle.omninas2
    iOS: http://itunes.apple.com/nz/app/omninas/id543929833
  • Networking Services
    Samba Server (SMB file sharing)
    with up to 256 share folders, up to 256 users and up to 256 concurrent connections
    FTP Server (File Transfer Protocol with SSL/TLS support)
    Apple File Protocol (AFP)
    DLNA Media Server
    iTunes Media Server 
    Printer Server (supports USB printers)
    BT download (scheduled and without PC)
    External device sharing (via USB or card reader)
    NTP support for scheduled time synchronization (RTC integrated)
    Wake on LAN (WOL)
  • System Services
    Firmware upgrade (online live update or offline manual update)
    Time-Zone settings
    Factory reset function
    System log report
  • Backup functions
    Quick Auto Copy for external storage connected to front USB (also PTP camera [3]) or card reader
    NAS to USB storage backup (scheduled or immediately)
    NAS to NAS backup (scheduled or immediately)
  • Disk Management
    HDD Spin down timer
    Check Disk
    Disk usage status management
    Disk Format
    SMART information report
  • File Systems
    Internal: XFS
    External: EXT2, EXT3, EXT4, XFS, NTFS, FAT, FAT32
  • System Requirements
    - Workstation OS: MS Windows XP SP3, Mac OS X 10.4, Apple Safari 3.0, 
    Linux kernel 2.6.x or later
    - Smart phone OS: iOS 4.2, Android 2.3 or later
    - Browser: MS Internet Explorer 7.0, Firefox 3.x, Google Chrome, Apple Safari 3.0 or later
    - Router for Internet connection
  • Standby Mode
    After a certain time of inactivity the system will enter power saving (standby) mode.
    This time can be set under: Settings - General - Power Saving Time Setting
    You can select a time from 10 minutes up to 5 hours.
  • Power on/off functions
    Scheduled power on/off - simple configuration for each day of the week
    Power Recovery: Auto restart after power failure
    Wake on LAN (WOL) [4]


 
Home | News | All News | Reviews | Articles | Guides | Download | Expert Area | Forum | Site Info
Site best viewed at 1024x768+ - CDRINFO.COM 1998-2024 - All rights reserved -
Privacy policy - Contact Us .