Saturday, October 25, 2014
Search
  
Thursday, March 27, 2014
 Shuttle Delivers 43 mm Barebone for LGA1150 Processors
You are sending an email that contains the article
and a private message for your recipient(s).
Your Name:
Your e-mail: * Required!
Recipient (e-mail): *
Subject: *
Introductory Message:
HTML/Text
(Photo: Yes/No)
(At the moment, only Text is allowed...)
 
Message Text: Shuttle today started delivery of its new Shuttle Barebone DS81 Slim PC for the latest Intel processors.

Measuring just 43 mm in height, the DS81 is compatible with fourth-generation Intel Core processors with LGA1150. Nearly all models, from the low-cost Celeron to the large Core i7, are supported (TDP max. 65 W).

The device has the Intel H81 chipset onboard and features two DisplayPorts, an HDMI connector, 2x Gigabit Ethernet and also offers two serial RS-232 interfaces for device control (1x switchable to RS-422/RS-485).

Also on the rear panel there is a "remote Power-On" connector. And if you want the DS81 to switch on automatically as soon as it is connected to a power source, an "Always-On" jumper is available on the mainboard.

In addition to powerful processors, up to 16 GB DDR3 memory and an internal 2.5" drive (SSD/HDD) with SATA 6 Gbit/s can be fitted in the DS81. Two Mini-PCI Express expansion slots are available for additional cards, e.g. Wireless LAN or mSATA-SSD.

On the front panel of the device there s a card reader for SD memory cards, along with eight USB ports (both USB 3.0 and USB 2.0).

The DS81 can be operated horizontally or verticallya and comes supplied with a VESA mount for installation to monitors.

The recommended price for the Shuttle DS81 is EUR 179.00 (ex VAT).

  • Chassis
    Nettop PC with black chassis made of metal
    Dimensions: 190 x 165 x 43 mm (LWH) = 1.35 litres
    Weight: 1.3 kg net and 2.1 kg gross
    Two holes for Kensington Locks and numerous 
    threaded holes (M3) at both sides of the chassis
  • Storage bay
    1x 6.35 cm / 2.5" storage bay supports one hard disk or SSD drive
    Device height: 9.5 or 12.5 mm (max.)
  • Operation System
    This system comes without operating system. It is compatible with Windows 8 / 8.1, Windows 7, Linux
  • Mainboard / Chipset / BIOS
    Mainboard: Shuttle FS81 (8 layer design)
    Chipset: Intel H81 Express Chipset
    (Intel DH82H81 PCH, code name "Lynx Point")
    AMI BIOS in 8 Mbit EEPROM with SPI interface
    All capacitors are high quality solid capacitors
    Supports hardware monitoring and watch dog functionality
    Supports Unified Extensible Firmware Interface (UEFI)
    Supports power on after power failure
  • Power Adapter
    External 90 W power adapter (fanless)
    Input: 100~240 V AC, 50/60 Hz
    Output: 19 V DC, 4.74 A, max. 90 W
    DC Connector: 5.5/2.5mm (outer/inner diameter)
  • Processor support
    Socket LGA 1150 (H3) supports the fourth generation of
    Intel Core i7 / i5 / i3 / Pentium processors
    Maximum supported processor power consumption (TDP) = 65W
    Codename "Haswell", 22nm process technology, up to 8 MB of L3 cache
    Not compatible with older Socket LGA 1155 processors.
    Does not support the unlock-function of Intel K-Series processors.
    The Processor integrates PCI-Express, memory controller
    and the graphics engine on the same die (depends on processor  type)
    Please refer to the support list for detailed processor support information.
  • Processor cooling
    Heat pipe processor cooling with two 60 mm fans on the upper side of the chassis
  • Memory support
    2x SO-DIMM slots with 204 pins
    Supports DDR3-1333/1600 SDRAM memory (PC3-10600/12800)
    The maximum memory clock rate depends on the processor type.
    Supports Dual Channel mode
    Supports max. 8 GB per DIMM,  maximum total size of 16 GB
    Supports two unbuffered DIMM modules of 1.5 V
  • Integrated Graphics
    The features of the integrated graphics function depend on the used processor type.
    Supports Dual-Independent-Display at Full HD 1080p resolution
    Supports Blu-ray (BD) playback with HDCP
    Supports one display running at 4K (3840 x 2160 / 2160p) high resolution when connected to its DisplayPort video output
    HDMI and DisplayPorts supports HD video plus multi-channel digital audio via a single cable
    Optional D-Sub/VGA connector
  • Mini PCIe Slots
    DS81 features two Mini PCI Express expansion slots:
    1) half size, supports PCIe 2.0 e.g. for WLAN cards
    2) full size, supports PCIe 2.0 and SATA 6G e.g. for Mini SATA (mSATA) flash memory cards
  • Audio
    Audio Realtek ALC 662-VC High-Definition Audio
    Two analog audio connectors (3.5mm) at the front panel: 
    1) 2 channel line out (head phone)
    2) microphone input
    Digital multi-channel audio output: via HDMI and DisplayPort
  • Dual Gigabit LAN Controller
    Dual Realtek 8111G Ethernet network controller (Gigabit)
    Supports 10 / 100 / 1.000 MBit/s operation
    With two RJ45 ports (dual network) supports Teaming 
    Supports WAKE ON LAN (WOL)
    Supports network boot by Preboot eXecution Environment (PXE)
  • Drive connectors
    1x Serial-ATA III, 6 Gb/s (600 MB/s) bandwidth
    1x Serial-ATA II, 3 Gb/s (300 MB/s) bandwidth
    With Serial-ATA power connector (onboard)
    Supports Unified Extensible Firmware Interface (UEFI) [2]
  • Card Reader
    Integrated card reader 
    Supports SD, SDHC and SDXC memory flash cards
    Supports boot up from SD card
  • Front Panel connectors
    Microphone input
    Audio Line-out (headphone)
    4x USB 2.0
    SD card reader
    Power button
    Power LED (blue)
    HDD LED (yellow)
  • Back Panel connectors
    1x HDMI connector
    2x DisplayPort connectors (DP, supports 4k resolution)
    2x USB 3.0
    2x USB 2.0
    2x Gigabit LAN (RJ45)
    2x RS232 serial ports (5V/12V, 1x switchable to RS422 / RS485)
    DC-input connector for external power adapter
    Four pin connector (2.54 mm pitch) supports
    - external power on button 
    - Clear CMOS function
    - +5V DC voltage for external components
    Perforation for Wireless LAN antennas (2 holes)
  • Other onboard connectors
    Jumper 4: Power on after power fail (hardware solution)
    1x analog VGA graphics output
    4x USB 2.0 (two 2x5 pin, occupied by the front panel)
    2x fan connectors (3pin and 4 pin) for the system fans
    2x10 pins LPC interface
    Front panel connectors (for audio)
    Power connector for SATA drives (4 pins)
  • Package
    Multi-language user guide
    VESA mount for 75/100mm standard (two metal brackets)
    Four thumbscrews M3 x 5 mm (screws together VESA mount and PC)
    Four screws M4 x 10 mm (to fix the VESA mount to the external device)
    Four screws M3 x 4 mm (to mount a 2.5" storage into the bay)
    Driver DVD (Windows 7/8 32/64 bit)
    1x SATA cable
    External power adapter with power cord
    Heatsink compound
  • Optional Accessies:
    WLN-S: Wireless LAN kit consisting of a Mini-PCIe card, 
    two antennas and appropriate antenna cables.
 
Home | News | All News | Reviews | Articles | Guides | Download | Expert Area | Forum | Site Info
Site best viewed at 1024x768+ - CDRINFO.COM 1998-2014 - All rights reserved -
Privacy policy - Contact Us .