Wednesday, September 17, 2014
Search
  
Thursday, March 06, 2014
 GIGABYTE Presents 2011 Socket Board With Integrated 10 Gigabit Ethernet
You are sending an email that contains the article
and a private message for your recipient(s).
Your Name:
Your e-mail: * Required!
Recipient (e-mail): *
Subject: *
Introductory Message:
HTML/Text
(Photo: Yes/No)
(At the moment, only Text is allowed...)
 
Message Text: GIGABYTE has just announced the the GA-6PXSVT, its first single 2011 socket based workstation motherboard featuring an integrated 10 Gigabit Ethernet LAN controller.

Designed for professional users, the ATX motherboard features ultra-fast networking, supports the Intel Xeon E5-1600 V2 & E5-2600 V2 processors and up to 256GB of ECC memory.

Until now, the most common way to add 10GbE capabilities were through add-in cards, or buying motherboards with them on board. But GIGABYTE's GA-6PXSVT single socket LGA2011 motherboard implements a single SFP+ 10GbE port on the rear panel, coupled with two additional GbE ports. It is equipped with Intel's third generation 82599EN 10GbE controller and a low latency SFP+ interface.



By combining the native SATA capabilities of the Intel C602 chipset with an extra Marvell 88SE9230 controller, the GA-6PXSVT boasts 10 SATA III 6Gb/s and 4 SATA II 3Gb/s ports.

The processor socket, the memory DIMMs and the PCI-Express slots being all oriented in the same direction in order to help deliver optimal airflow performance to keep the temperature of the components low. In addition, the motherboard can be used in both rack and tower integration.

The support of Intel Xeon processors E5-1600 V2 & 2600 V2 product families delivers the benefits of the 22nm tri-gate process technology. Those benefits include, among others, higher frequencies, higher core counts (up to 12 cores / 24 threads) and larger last-level caches, but also a much more varied mix of core/frequencies with the introduction of a new dual socket workstation segment.

Finally, virtualization applications will benefit from the Advanced Programmable Interrupt Controller (APIC) technology, and more security features are included in the mix as well, such as the Intel Platform Protection Technology with OS Guard, and Intel Data Protection Technology with Secure Key.

The GA-6PXSVT will be released in the next few weeks.


Form Factor ATX
305W x 244D (mm)
CPU Supports:
  • IntelXeonE5-2600 V2 processors
  • InteXeonE5-1600 V2 processors
  • Intel XeonE5-2600 processors
  • Intel XeonE5-1600 processors
  • Intel l2nd & 3rd Gen. Core i7 processors
Socket

1 x LGA 2011
Mounting pitch: narrow ILM (56x94mm)
Recommended cooling device dimension: 70x106mm
Max. length of M4 screw threads: 3.7mm
Screws longer than 3.7mm might damage the motherboard

Chipset IntelC602
Memory 8 x DIMM slots
Quad channel memory architecture
ECC & non-ECC UDIMM/RDIMM modules supported
Single and dual rank UDIMM modules up to 8GB supported
Single, dual and quad rank RDIMM modules up to 32GB supported
1.35V modules: 1066/1333/(1600*) MHz
1.5V modules: 1066/1333/1600/(1866*) MHz

*Supported by IntelXeonE5-2600 V2 processors only
LAN 2 x GbE LAN ports (Intel 82574L)
1 x 10GbE SFP+ LAN port (Intel 82599EN)
Video Integrated in Aspeed AST2400
2D Video Graphic Adapter with PCIe bus interface
128MB memory
1920x1200@60Hz 32bpp
Audio -
SAS -
SATA 2 x SATA III 6Gb/s supporting SATA DOM
8 x SATA III 6Gb/s from Marvell 88SE9230 controller
4 x SATA II 3Gb/s
RAID Intel SATA RAID 0/1/10/5
Marvell SATA RAID 0/1/10
Expansion Slots 2 x PCIe x16 (Gen3 x16 bus) slots
or (via PCIe switch):
1 x PCIe x16 (Gen3 x16 bus) slot
2 x PCIe x16 (Gen3 x8 bus) slots
Internal I/O 1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector
1 x PMBus connector
4 x System fan headers
1 x CPU fan header
1 x SATA SGPIO header
1 x SATA port 0 DOM support jumper
1 x SATA port 1 DOM support jumper
1 x BIOS upgrade ROM
10 x SATA III 6Gb/s ports
4 x SATA II 3Gb/s ports
1 x CMOS battery socket
1 x Chassis intrusion jumper
1 x Clear CMOS jumper
1 x Clear password jumper
1 x Front panel header
1 x USB 2.0 Type A connector
1 x Backplane board header
1 x BIOS recovery jumper
1 x BIOS write protect jumper
1 x USB 3.0 header
1 x USB 2.0 header
1 x Serial header
1 x BMC upgrade ROM
1 x TPM header
1 x LAN3 active LED
1 x BMC readiness LED
1 x ME Recovery jumper
1 x PCIE1 and PCIE2 bandwidth switch jumper
1 x PMBus select jumper
1 x Force to stop FRB3 timer jumper
1 x S3 power on select jumper
Rear I/O 4 x USB 3.0
2 x USB 2.0
1 x PS/2
1 x Serial
1 x VGA
1 x SFP+
2 x RJ45
1 x ID button with LED
TPM 1 x TPM header
OS Supported Windows Server 2008 SP2 32/64bit
Windows Server 2008 R2 64bit
Windows Server 2012 64bit
Windows 7 SP1 32/64bit

RedHat ELAS 5.7 32/64bit
RedHat ELAS 6.1 32/64bit

SuSE ES 11.1 32/64bit
Board Management -
PSU Connectors 1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector
Retail Packaging Bundle 1 x Driver CD
1 x I/O shield
2 x SATA cables (500mm)
Ordering Information Retail: 9M6PXSVTMR-SI


 
Home | News | All News | Reviews | Articles | Guides | Download | Expert Area | Forum | Site Info
Site best viewed at 1024x768+ - CDRINFO.COM 1998-2014 - All rights reserved -
Privacy policy - Contact Us .