Saturday, September 05, 2015
All News Categories
Reviews Around the Web
DVD Media Formats
Optical Storage Software
News Around The Web
Monday, May 02, 2011
Elpida Develops 25nm Process DRAM
You are sending an email that contains the article
and a private message for your recipient(s).
(At the moment, only Text is allowed...)
Elpida Memory today announced it had developed a 2-gigabit DDR3 SDRAM using a 25nm process for memory manufacturing.
Using the advanced process technology available Elpida claims that it has has achieved the industry's smallest chip size for a 2-gigabit SDRAM.
The new 25nm DRAM process technology requires 30% less cell area per bit compared with Elpida's 30nm process. The chip output for a 2-gigabit DDR3 SDRAM wafer using the new process is about 30% higher versus 30nm.
The new SDRAM is an eco-friendly as it contributes to lower energy consumption by PCs and digital consumer electronics. It outperforms Elpida's 30nm process products by saving on electric current (15% less operating current and 20% less current when on standby).
At the time the 25nm process was developed the structural changes required to shift from a 30nm process were minimized to hold down the capital expenditure needed for ramping up 25nm volume manufacturing.
By the end of 2011 Elpida also plans to begin volume production of 4-gigabit DDR3 SDRAM products using the 25nm process. Compared with the 30nm process a 44% increase in chip output per wafer is expected for this 4-gigabit DDR3 product. In addition, the new 25nm process will be used to support further development of Mobile RAM, Elpida's mainstay memory product.
The 25nm process 2-gigabit DDR3 SDRAM can support performance above DDR3-1866 (1866Mbps) and is compliant with low-voltage 1.35V high-speed DDR3L-1600 (1600Mbps).
Both sample shipments of the new 25nm 2-gigabit DDR3 SDRAM and volume production are expected to begin in July 2011.
Part Number: EDJ2104BFSE / EDJ2108BFSE
Manufacturing Process: 25nm CMOS
Memory Density: 2G-bit
Data Width: x4-bit / x8-bit
Data Transfer Rate: 1866Mbps and higher
Supply Voltage (VDD): 1.5V, 1.35V (Low voltage)
Operating Case Temperature Range (TC): 0 to 95°C
Site best viewed at 1024x768+ -
1998-2015 - All rights reserved