|
|
Wednesday, February 24, 2010
|
Samsung Starts Mass Production of 40nm-class 4Gigabit DDR3
|
|
You are sending an email that contains the article
and a private message for your recipient(s). |
| Your Name: |
|
| Your e-mail: |
* Required! |
| Recipient (e-mail): |
* |
| Subject: |
* |
| Introductory Message: |
|
HTML/Text
(Photo: Yes/No) |
(At the moment, only Text is allowed...)
|
| |
|
| Message Text: |
Samsung announced today that it has begun mass producing the first low-power (green) four gigabit (Gb) DDR3 devices using 40 nanometer (nm) class process technology.
The high-density memory is expected to bring significant power savings to data centers, server systems and high-end notebooks.
"When our 40nm-class DDR3 was first introduced last July, we were well ahead of the curve for high density, high performance DDR3. When our 40nm-class DDR3 was first introduced last July, we were well ahead of the curve for high density, high performance DDR3," said Dong-Soo Jun, executive vice president, memory marketing, Samsung Electronics. "Now, in just seven more months, we have introduced an ultra-low power 'Green Memory' - the 4Gb DDR3, which is double the density of its predecessor. At a module density of 16-gigabyte (GB), the 4Gb based module can save 35 percent in power consumption, to support customer requirements for more energy-efficient designs."
Samsung?s 40nm-class Green DDR3 is optimized to enhance energy-efficiency ratings for servers seeking to comply with or exceed new Energy Star power consumption specifications.
Production of the 4Gb DDR3 raises the amount of memory for use in servers to 32Gigabytes (GB) per module, which is twice the maximum density achieved with modules based on 2Gb components.
With the start of volume 4Gb DDR3 production, Samsung plans to migrate more than 90 percent of its DDR DRAM production to 40nm-class process technology.
Today, servers are equipped with an average of six registered dual in-line memory module (RDIMMs) sockets per CPU, with which up to a 96GB DRAM capacity can be accommodated. Power consumption varies depending on the component featured. A module based on 60nm-class 1Gb DDR2 components consumes 210W, while a 40nm-class 2Gb DDR3-based module consumes 55W, representing an approximate 75 percent savings. However, the new 40nm-class 4Gb DDR3-based module consumes a mere 36W, which represents about 83 percent savings over the 60nm-class 1Gb DDR2 module. With growing concern about energy costs in data centers, these memory power savings translate into an overall reduction in server power of 10 percent per system.
The 4Gb DDR3 raises the small outline dual inline memory module (SoDIMM) density to 8GB. This enables a system level density of up to 16GB for two socket modes, or 32GB for four socket models, which is expected to meet much of the growing demand for high-performance notebooks with advanced graphics.
The new 4Gb DDR3 supports both 1.5V and 1.35V specifications. Available memory modules include 16 and 32GB RDIMMs and 8GB SoDIMMs with a 1.6-Gigabit per second (Gbps) performance rate. |
|
|
|
|