|
|
Thursday, December 3, 2009
|
New Micron RealSSD C300 Solid-State Drive Natively Supports SATA 6Gb/s
|
|
You are sending an email that contains the article
and a private message for your recipient(s). |
| Your Name: |
|
| Your e-mail: |
* Required! |
| Recipient (e-mail): |
* |
| Subject: |
* |
| Introductory Message: |
|
HTML/Text
(Photo: Yes/No) |
(At the moment, only Text is allowed...)
|
| |
|
| Message Text: |
Micron Technology today announced its RealSSD C300 SSD, an ultra-fast drive for notebook and desktop PCs, ofering faster OS boot/hibernate times, speedier application loads and accelerated data transfer rates.
"The C300 SSD not only delivers on all the inherent advantages of SSDs - improved reliability and lower power use - but also leverages a finely tuned architecture and high-speed ONFI 2.1 NAND to provide a whole new level of performance," said Dean Klein, vice president of memory system development at Micron.
While benchmark tests have shown that the C300 SSD is the fastest PC SSD leveraging the industry standard SATA 3Gb/s interface, the SSD performance is further boosted by natively supporting the next generation high-speed interface - SATA 6Gb/s.
 Native support of SATA 6Gb/s means that the data path between the host computer and the SSD is twice as fast as the previous SATA 3Gb/s interface. While some drive architectures require a trade-off between throughput-sensitive and IOPS (Input/Output Per Second)-sensitive data streams, Micron?s core design and higher speed interface provides advantages for both. The C300 SSD leverages the SATA 6Gb/s interface to achieve a read throughput speed of up to 355MB/s and a write throughput speed of up to 215MB/s. Using the common PC Mark Vantage scoring system, the C300 SSD turns in a score of 45,000 from the HDD Suite.
"Hard drives gain little performance advantage when using SATA 6Gb/s because of mechanical limitations," said Klein. "As a developer of leading-edge NAND technology, along with our sophisticated controller and firmware innovations, Micron is well positioned to tune our drives to take full advantage of the faster speeds achieved using the SATA 6Gb/s interface. The combination of these technology advancements has enabled the RealSSD C300 drive to far outshine the competition."
The RealSSD C300 drive leverages Micron?s 34nm MLC NAND flash memory. Bringing another first to SSDs, Micron?s 34nm MLC NAND supports the high-speed ONFI 2.1 standard, ensuring the NAND performance keeps pace with the faster SATA 6Gb/s interface.
The drives will be available in 1.8-inch and 2.5-inch form factors, with both drives supporting 128GB and 256GB capacities. Micron is currently sampling the C300 SSD in limited quantities and expects to enter production in the first quarter of calendar 2010.
|
|
|
|
|