Hallo
i am new here ,i would like to know how can i 90min or 99min burn with this cdr becouse i have nero brenn porgramm and it show only 80min
I have update download from http://www.liteonit.com firmware for the cdr but afraide it show the same , i have seen in the post somebody sayes that when we brenn at low speed upto 8 then doesn,t matter. is that true. But if nero can say that or tell original it will be very good
thank please if any one can help i will be very greatfull
i have seen other post thahttp://www.cdrinfo.com/forum/topic.asp?TOPIC_ID=7704t but how can it help me [?] or my problem is that i wouuld like that nero software should show the write format of the cd , should i my nero update it is ver 5.510.15 and not demo [8)]

hallo
i have come to this page it is very intersting http://www.xeocorp.com/support/support.htm
when that is true then i have loent my CDR .
or can also this http://www.medeainternational.com/info/90min.htm
tell your opienen
thanks

(in reply to mnadeem)

Most 90 minutes disc's show up as 80 minutes disc in most writers(with most firmwares). The full capacity is most times only possible with overburning. I think the settings for overburning options for NERO can be find quite easily on the net/forum if not then ask for it.

However it is possible that some 90 minutes disc's will only work on with very few writers and not with your writer.(Melody 90 minutes (first version) doesn't work with Lite On's /Plextor and most other burners. In fact only mitsumi,LG and Teac have some models that support these 90 minutes disc's. However I have heard that the newer ones are possible to use on most burners. But I won't recommend them knowing the quality of most melody media.

Newer 90 minutes media from TDK,Datatrack shows up as 90 minutes media on some writers (depending on writer and firmware) if the drive recognizes the media correct you can burn it up to 90 minutes without overburning settings.

(in reply to mnadeem)

HI
i respect your saying as you said i have done it my cdr has option of overburning and i have set it in nero , but when i have starting film to burn he said need big cd-r or can do the job but ineffect it has demage my one cd-r when so go on then [V]
that is not the ansewar there must be a hint or clou how can we with out any problem safely brenn atleast data .

(in reply to mnadeem)

Have you set DAO as writing method.[?]

(in reply to mnadeem)

HI
Can you sxplain what is DAO

(in reply to mnadeem)

Hi
i have yet another problem nero says that i have a virus in my computer and have to new install , but every thing is ok .asso i have new installed but the masseg is the same then i have look for my another programm ahead nerovision and it works fine why [V]

(in reply to mnadeem)

DAO (Disc at Once) for a guide. Check the link I haven't tried this guide myself so far. Since I just clicked some things I needed at home which I guessed I needed them and since I am not at home or have NERO at hand I can't check the settings directly.
So if this guide for overburning ?
If this doesn't work for you then I will look at my home settings. So let me know.

http://www.enovationmedia.com/support/faqcdr99minwalkthrough.php

(in reply to mnadeem)

HI
I have Ždone it 90 min cd-r to burn thanks telling me what is DAO and the links now i will try 99min cd-r , but you know i have in 4x done it [:p]

(in reply to mnadeem)

lower speeds are most times more succesfull when ussing overburn options.

(in reply to mnadeem)

HI
you are right, im have also treied 99min in 4x to brenn but no luck there is a message of virus in end , can also brenn film on it but how can i coŽnvert divx format in vcd nero gives no help and some time it say there is no format .And when i treid normal vcd it has taken very time first decode then brenn is that ok

(in reply to mnadeem)

hi
i have update my cdr then tryed with 99min cd-r in 4x only data , done it , but when go to 16x cd-r is bad [:0]

(in reply to mnadeem)

HI rjw
Can you tell me how can i burn my cd-r with 16x becouse it waist of time when burning 4x or 8x why i have given so much mony for that . and second why it decode first every time when i like to brenn film with it nero takes up to 3hour .[?]

(in reply to mnadeem)

I'm sorry but I can't.
Overburning depends on drive and firmware.
Depending on different drives and firmwares and different media you have different results. If a drive will not let you write it at a higher speed you could try a firmware update or try different media.

Remember Lower speeds are most times more succesfull.
I can't do anything about it if some drive will not write some 80+ media. (Some media works only on 3 drives.)Or that it only works at a very low speed with you drive.
The only thing you could try is different 80+ media from a different manufacturer but then again some drives are very limited when overburning and will only do it at 4x and lower. The problem for experimentating is that you might end up with a disc which your drive cannot support. Still the disc's can be used as 80 minutes disc's in this case. However for Lite On drives this change is small so far only old Melody 90 minutes disc's are not supported by Lite On (now I don't know the real manufacturer) but this media allready states on the outside which 3 drives support it.

(in reply to mnadeem)

hi
new problem why can not i see the film burn with nero programm saying no klass or format . where can i gett all needed formats for my multomedia , thanks

(in reply to mnadeem)

hi
after a long reserch i have found two software one name videofixjoiner and second gspot i have fixed my nero burning problem. with thease programm i have fixed first my film and then burn on cd with no problem yat i can see them on my dvd player

(in reply to mnadeem)