CDRInfo Forum CDRInfo Forum

Forums  Register  Login  My Profile  Inbox  Address Book  My Subscription  My Forums 

Photo Gallery  Member List  Search  Calendars  FAQ  Ticket List  Log Out

nec nd6500a dl burning   Logged in as: Guest
Viewers: 1446 You can click here to see Today's Posts | Most Active Topics | Posts Since Last Visit
  Printable Version
All Forums >> [Optical Storage] >> Firmware >> NEC >> nec nd6500a dl burning Page: [1]
Login
Message << Older Topic   Newer Topic >>
nec nd6500a dl burning - 4/12/2005 4:57:30 AM   
rookie7

 

Posts: 5
Joined: 4/12/2005
Status: offline
hi
I flashed my drive from the 6450 to 6500a.
It worked, roxio reported the drive as nec nd6500a with dl capabilities.
When I tried to burn a data disc with roxio media center it said burn as read only .
So I checked the read only box, but then it reported an error : Cannot write medium, incompatible format, illegal request (05/30/05)
the disc is a dvd dl ritek 2.4x 8.5gb disc, is there a problem with the drive or the disc?
Post #: 1
RE: nec nd6500a dl burning - 4/12/2005 11:57:16 AM   
emperor


Posts: 7210
Joined: 4/28/2004
Status: offline
how about using the latest NEC 6500A firmware? I am not very sure which Roxio versison you tested, does it support DL burning?

(in reply to rookie7)
Post #: 2
RE: nec nd6500a dl burning - 4/12/2005 8:23:17 PM   
MP3Mogul


Posts: 5743
Joined: 4/11/2002
From: Retired Moderator
Status: offline
I burned 2 dual layer verbatim discs today with Nero and the 6500A, no problem. I used firmware 2.81.


_____________________________



LG GSA H22L Firm 1.02
Samsung SH-203N Firm SB01
LiteOn SOHD-16P9S Firm FS0D

(in reply to emperor)
Post #: 3
RE: nec nd6500a dl burning - 4/13/2005 4:48:53 AM   
rookie7

 

Posts: 5
Joined: 4/12/2005
Status: offline
its roxio easy media creator 7, and the firmware version is 2.23, but I read somewhere that dl ritek discs have problems.
whats the latest firmware for the drive?

(in reply to rookie7)
Post #: 4
RE: nec nd6500a dl burning - 4/13/2005 12:38:54 PM   
emperor


Posts: 7210
Joined: 4/28/2004
Status: offline
2.24 or 2.N0

(in reply to rookie7)
Post #: 5
RE: nec nd6500a dl burning - 4/16/2005 11:31:26 AM   
rookie7

 

Posts: 5
Joined: 4/12/2005
Status: offline
I have upgraded to 2.24 from 2.23 and still the same message , I even tried changing the dl disc to verbatim, it did'nt help still the same message.
Any Ideas?

(in reply to emperor)
Post #: 6
RE: nec nd6500a dl burning - 4/16/2005 7:43:25 PM   
rookie7

 

Posts: 5
Joined: 4/12/2005
Status: offline
I have now purchased verbatim DL media and changed the firmware to 2.no ,I have also tried re-installing my roxio burning software but still the same message!
The computer is a HP dv series 1.8 Mhz centrino(Dothan), 1gig RAM.
Roxio recognizes the drive as having DL capabilities.
I work in South Korea and I bought the notebook here.

(in reply to rookie7)
Post #: 7
RE: nec nd6500a dl burning - 4/16/2005 8:41:19 PM   
rookie7

 

Posts: 5
Joined: 4/12/2005
Status: offline
I tried burning with nero 6.6.0.12 it also says burn process failed here is the log.


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.12
Internal Version: 6, 6, 0, 12c
(Nero Express)
Recorder: <_NEC DVD+-RW ND-6500A> Version: 2.N0 - HA 1 TA 0 - 6.6.0.12
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD+-RW ND-6500A>Version: 2.N0 - HA 1 TA 0 - 6.6.0.12
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK8026GAX atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
_NEC DVD+-RW ND-6500A D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 990MB (1014192kB)
Free physical memory: 501MB (513524kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

17.4.2005
ISO compilation
9:04:41 AM #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

9:04:41 AM #2 Text 0 File Reader.cpp, Line 127
Reader running

9:04:41 AM #3 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD+-RW ND-6500A running

9:04:41 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

9:04:41 AM #5 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

9:04:42 AM #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4071839 (904:51.14, 7952MB)

9:04:42 AM #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

9:04:42 AM #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD+R9 Double Layer

9:04:42 AM #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:04:42 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 4071840 (4071840) = #4071840/904:51.15
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4071840 blocks [_NEC DVD+-RW ND-6500A]
--------------------------------------------------------------

9:04:43 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [_NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8339128320, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
4071840 | lead-out | 1 | 0x41 | 0x00

9:04:43 AM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

9:04:45 AM #13 Text 0 File Burncd.cpp, Line 4037
Cache writing successful.

9:04:45 AM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

9:04:45 AM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)

9:04:45 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:04:45 AM #17 Text 0 File DVDPlusDualLayer.cpp, Line 430
Disc finalized, LBA total Image size: 4071840 (7952MB), Last LBA L0: 2035935 (3976MB)

9:04:45 AM #18 Text 0 File DVDPlusDualLayer.cpp, Line 519
L0 Data Zone Capacity set to 2035936 (1F10E0h, 3976MB) -> OK, confirmed setting

9:04:45 AM #19 CDR -1205 File DVDPlusDualLayer.cpp, Line 544
Burning Layer 1

9:04:45 AM #20 Text 0 File DVDPlusDualLayer.cpp, Line 552
Start writing layer 1 at address 0 (0h)

9:04:45 AM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06F00600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

9:04:45 AM #22 Text 0 File DVDR.cpp, Line 5955
Book Type counter: 500, Book Type selected in EEPROM, command version 2

9:04:45 AM #23 Text 0 File DVDR.cpp, Line 5955
Book Type counter: 500, Book Type selected in EEPROM, command version 2

9:04:45 AM #24 Text 0 File DVDR.cpp, Line 5955
Book Type counter: 500, Book Type selected in EEPROM, command version 2

9:04:45 AM #25 Text 0 File DVDR.cpp, Line 5071
Drive: _NEC DVD+-RW ND-6500A
Book Type request [NEC]: DVD-ROM, write to RAM
select Book Type setting from RAM
Changing the Book Type was finished successfully, return code 0

9:04:45 AM #26 CDR -1207 File DVDR.cpp, Line 4777
Book Type automatically set to: DVD-ROM

9:04:45 AM #27 Text 0 File DVDPlusRW.cpp, Line 648
Start write address at LBA 0
DVD high compatibility mode: Yes

9:04:49 AM #28 SCSI -1046 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x068B0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

9:04:49 AM #29 CDR -1046 File Writer.cpp, Line 311
Illegal disc

9:04:49 AM #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

9:04:49 AM #31 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

9:04:49 AM #32 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

9:04:49 AM #33 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

9:04:49 AM #34 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders

9:04:49 AM #35 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully

9:04:49 AM #36 Text 0 File DVDR.cpp, Line 5955
Book Type counter: 500, Book Type selected in RAM, command version 2

9:04:50 AM #37 Text 0 File DVDR.cpp, Line 5955
Book Type counter: 500, Book Type selected in RAM, command version 2

9:04:50 AM #38 Text 0 File DVDR.cpp, Line 5071
Drive: _NEC DVD+-RW ND-6500A
Book Type request [NEC]: DVD-ROM, write to RAM
select Book Type setting from RAM
Changing the Book Type was finished successfully, return code 0

9:04:50 AM #39 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created 11/17/2004 9:16:48 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 3/13/2005 11:05:05 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 2:59:42 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

HELP ME!!

(in reply to rookie7)
Post #: 8
RE: nec nd6500a dl burning - 4/17/2005 1:26:33 PM   
emperor


Posts: 7210
Joined: 4/28/2004
Status: offline
maybe your drive is damaged?

(in reply to rookie7)
Post #: 9
RE: nec nd6500a dl burning - 5/19/2005 10:53:09 PM   
Pistala


Posts: 2
Joined: 5/19/2005
Status: offline
I have a same problem. 6450 upgraded to 6500, all software DVDinfopro and Nero shows DL capable but when I try it shows illegal disc and finishes the operation. I have all software versions updated Nero etc.It crashes right after it should burn Layer one. BTW Memorex +R DL.


< Message edited by Pistala -- 5/19/2005 11:05:07 PM >


_____________________________

HP Pavilion ZV5450 ND6450@6500

(in reply to emperor)
Post #: 10
RE: nec nd6500a dl burning - 5/25/2005 4:01:32 PM   
JosieNutter


Posts: 9
Joined: 4/30/2005
From: San Francisco
Status: offline
I had similar problems with the 2.4x Dynex (Ritek) DL discs until I went from 2.02C to 2.03D.

Mine's an OEM(?) 6500a in a Dell Inspiron 700m.


_____________________________

Josie Nutter
Level Programmer
Crystal Dynamics

(in reply to Pistala)
Post #: 11
RE: nec nd6500a dl burning - 5/26/2005 1:54:18 AM   
Pistala


Posts: 2
Joined: 5/19/2005
Status: offline
I'm using the 2.4 upgrade firmware which works fine except DL. Maybe I should change the media... 


_____________________________

HP Pavilion ZV5450 ND6450@6500

(in reply to JosieNutter)
Post #: 12
Page:   [1]
All Forums >> [Optical Storage] >> Firmware >> NEC >> nec nd6500a dl burning Page: [1]
Jump to:





New Messages No New Messages
Hot Topic w/ New Messages Hot Topic w/o New Messages
Locked w/ New Messages Locked w/o New Messages
 Post New Thread
 Reply to Message
 Post New Poll
 Submit Vote
 Delete My Own Post
 Delete My Own Thread
 Rate Posts




Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI

0.047