CDRInfo Forum CDRInfo Forum

Forums  Register  Login  My Profile  Inbox  Address Book  My Subscription  My Forums 

Photo Gallery  Member List  Search  Calendars  FAQ  Ticket List  Log Out

NEC 3520A: Error sending firmware to drive, Error while flashing   Logged in as: Guest
Viewers: 600 You can click here to see Today's Posts | Most Active Topics | Posts Since Last Visit
  Printable Version
All Forums >> [Optical Storage] >> Firmware >> NEC >> NEC 3520A: Error sending firmware to drive, Error while flashing Page: [1]
Login
Message << Older Topic   Newer Topic >>
NEC 3520A: Error sending firmware to drive, Error while... - 3/10/2005 4:39:45 PM   
artik

 

Posts: 5
Joined: 3/10/2005
Status: offline
It happens with any firmware. I've tried nec 1.26 original firm, LD3520-1.u7, etc, i get these errors with any firmware. I use Binflash gui 1.11 and 1.12.

Then the drive keeps blinking, being unable to open it.

Thanks in advance


< Message edited by artik -- 3/10/2005 5:20:38 PM >
Post #: 1
RE: NEC 3520A: Error sending firmware to drive, Error w... - 3/10/2005 7:17:41 PM   
emperor


Posts: 7210
Joined: 4/28/2004
Status: offline
Seems like you have a problem here, i don't know if flashing from DOS will help

(in reply to artik)
Post #: 2
RE: NEC 3520A: Error sending firmware to drive, Error w... - 3/11/2005 12:17:00 PM   
artik

 

Posts: 5
Joined: 3/10/2005
Status: offline
This drive is real ****...... doesnt mind how i try to flash, look:

D:\NEC>necflash -v -s -flash nec3520_iodata_126.bin f:
Binflash - NEC version - (C) by Herrie and Liggy
Visit http://binflash.cdfreaks.com - http://www.herrie.org

Identified drive: 5
Detected drive from Firmware: 5

Sending firmware to drive at 0x006000
// sptxSay.DeviceIoControl: x57 (87) The parameter is incorrect.
// sptxSay x 0 0 8000 E (ioctl status length senseLength)
Problem sending firmware to drive
Error while flashing firmware

I hate NEC, very bad experience with it, guys

(in reply to emperor)
Post #: 3
RE: NEC 3520A: Error sending firmware to drive, Error w... - 3/11/2005 5:32:15 PM   
emperor


Posts: 7210
Joined: 4/28/2004
Status: offline
have you tried the latest 1.12 binflash?

(in reply to artik)
Post #: 4
RE: NEC 3520A: Error sending firmware to drive, Error w... - 3/11/2005 7:39:31 PM   
artik

 

Posts: 5
Joined: 3/10/2005
Status: offline
yes

(in reply to emperor)
Post #: 5
RE: NEC 3520A: Error sending firmware to drive, Error w... - 3/12/2005 5:35:30 PM   
emperor


Posts: 7210
Joined: 4/28/2004
Status: offline
...

(in reply to artik)
Post #: 6
RE: NEC 3520A: Error sending firmware to drive, Error w... - 3/27/2005 3:07:52 PM   
astha zala

 

Posts: 3
Joined: 3/27/2005
Status: offline
artick, if you still can't flash it, try going into safe mode. I had the same problem as you did, and it worked fine in safe mode with Binflash 1.14 GUI.

(in reply to emperor)
Post #: 7
RE: NEC 3520A: Error sending firmware to drive, Error w... - 3/27/2005 4:25:50 PM   
Astro


Posts: 108
Joined: 6/25/2004
Status: offline
If I were you I would send it back...or wait for the new 3540A and swap it with that one.
After all, you have payed for a drive that shouldn't have problems with flashing,and yours does not fulfill this specs.

(in reply to astha zala)
Post #: 8
RE: NEC 3520A: Error sending firmware to drive, Error w... - 3/28/2005 10:48:00 PM   
shoota

 

Posts: 9
Joined: 1/26/2005
Status: offline
do you have your 3520a drive set as the master drive on the ide cable? also u might need to actually boot into dos, not just use the dos prompt from inside windows.

(in reply to Astro)
Post #: 9
Page:   [1]
All Forums >> [Optical Storage] >> Firmware >> NEC >> NEC 3520A: Error sending firmware to drive, Error while flashing Page: [1]
Jump to:





New Messages No New Messages
Hot Topic w/ New Messages Hot Topic w/o New Messages
Locked w/ New Messages Locked w/o New Messages
 Post New Thread
 Reply to Message
 Post New Poll
 Submit Vote
 Delete My Own Post
 Delete My Own Thread
 Rate Posts




Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI

0.031